SAMS Survey Process and Reporting 2

Question 1

When surveying a vessel's hull below the waterline, which method provides the most reliable assessment of thickness without haul-out?

Accepted Answer

Ultrasonic thickness testing from underwater

Answer

Ultrasonic thickness testing can be performed by a diver to measure hull plating thickness accurately without requiring the vessel to be hauled out.

Question 2

In a SAMS survey report, what does the term 'surveyed on afloat' indicate about the scope of the examination?

Accepted Answer

The surveyor conducted an in-water inspection only, limiting hull bottom access

Answer

An afloat survey means the hull bottom was not accessible for direct inspection, which must be clearly noted as a scope limitation in the report.

Question 3

A surveyor discovers evidence of a prior insurance claim repair that was not disclosed by the owner. What is the proper course of action?

Accepted Answer

Note the undisclosed repair in the report and assess its quality

Answer

The surveyor must document all findings including undisclosed prior repairs, assess the workmanship, and report the condition objectively without taking sides.

Question 4

Which section of a marine survey report typically describes the purpose and scope of the inspection?

Accepted Answer

Basis of Survey / Scope of Inspection

Answer

The Basis of Survey or Scope of Inspection section defines what was examined, what was excluded, and the purpose for which the survey was commissioned.

Question 5

When inspecting a vessel's standing rigging, a surveyor finds one wire shroud with a single broken strand. What is the correct classification of this finding?

Accepted Answer

Safety deficiency requiring immediate replacement

Answer

Any broken strand in standing rigging compromises the wire's integrity and load-bearing capacity, making it a safety deficiency requiring replacement before offshore use.

(SAMS) Society of Accredited Marine Surveyors Certified Practice Test

(SAMS) Society of Accredited Marine Surveyors Certified Practice Test

SAMS Survey Process and Reporting 2