SAF Risk Assessment & Hazard Identification 3

Question 1

Which hazard category includes slips, trips, and falls as well as struck-by and caught-in hazards?

Accepted Answer

Physical hazards

Answer

Slips, trips, falls, struck-by, and caught-in incidents are classified as physical hazards because they involve energy transfers or mechanical contact.

Question 2

According to the hierarchy of controls, which control type is considered MOST effective?

Accepted Answer

Elimination

Answer

Elimination — physically removing the hazard — is the most effective control because it removes the risk at the source.

Question 3

A Safety Data Sheet (SDS) Section 2 provides information on:

Accepted Answer

Hazard identification

Answer

SDS Section 2 is dedicated to hazard identification, including GHS classification, signal words, and hazard statements.

Question 4

What does the acronym 'ALARP' stand for in risk management?

Accepted Answer

As Low As Reasonably Practicable

Answer

ALARP means 'As Low As Reasonably Practicable,' indicating risk must be reduced until further reduction would be grossly disproportionate to the benefit.

Question 5

Which method involves systematically examining a process by asking 'What if?' questions to identify potential deviations and consequences?

Accepted Answer

What-If Analysis

Answer

A What-If Analysis uses structured 'What if?' questions to brainstorm deviations from normal operations and their potential consequences.

(SAF) Safety Assessment Federation Certification Practice Test

(SAF) Safety Assessment Federation Certification Practice Test

SAF Risk Assessment & Hazard Identification 3