SAF Personal Protective Equipment 2 — Questions and Answers
Question 1: Which OSHA standard specifically governs Personal Protective Equipment in general industry?
- 29 CFR 1910.132 (Correct answer)
- 29 CFR 1926.95
- 29 CFR 1910.1200
- 29 CFR 1910.147
Correct answer: 29 CFR 1910.132
29 CFR 1910.132 is the OSHA general industry standard that establishes the general requirements for PPE selection, use, and maintenance.
Question 2: When must an employer provide PPE to employees at no cost?
- Only when the employee requests it
- When required by OSHA standards to protect from workplace hazards (Correct answer)
- Only during probationary periods
- Only when the hazard risk is rated severe or critical
Correct answer: When required by OSHA standards to protect from workplace hazards
OSHA requires employers to provide PPE at no cost to employees when it is necessary to protect them from workplace hazards, with limited exceptions for everyday clothing.
Question 3: What type of glove is BEST suited for handling strong acids?
- Leather gloves
- Cotton-lined latex gloves
- Neoprene or butyl rubber gloves (Correct answer)
- Cut-resistant Kevlar gloves
Correct answer: Neoprene or butyl rubber gloves
Neoprene and butyl rubber gloves provide superior resistance to strong acids and corrosive chemicals compared to natural rubber or fabric gloves.
Question 4: A worker is exposed to flying particles during grinding operations. Which eye protection is MOST appropriate?
- Tinted safety glasses
- Non-vented chemical splash goggles
- Indirect-vent impact goggles or face shield over safety glasses (Correct answer)
- Standard prescription eyeglasses
Correct answer: Indirect-vent impact goggles or face shield over safety glasses
Indirect-vent impact goggles or a full face shield worn over safety glasses provide the best protection against flying particles from grinding.
Question 5: What is the primary purpose of a hazard assessment before selecting PPE?
- To determine which PPE is cheapest to purchase
- To identify workplace hazards and evaluate the need for PPE (Correct answer)
- To fulfill annual safety meeting requirements
- To document employee PPE refusals
Correct answer: To identify workplace hazards and evaluate the need for PPE
A hazard assessment identifies the types and severity of hazards present so that appropriate PPE can be selected to adequately protect workers.
Question 6: Class E hard hats are designed to protect against which hazard in addition to impact?
- Chemical splash
- High-voltage electrical conductors up to 20,000 volts (Correct answer)
- Extreme heat up to 500°F
- Laser radiation
Correct answer: High-voltage electrical conductors up to 20,000 volts
Class E (Electrical) hard hats are tested to reduce electrical shock from contact with conductors up to 20,000 volts.
Question 7: Which fit-testing method is considered the gold standard for tight-fitting respirators?
- Qualitative fit test using irritant smoke
- Quantitative fit test using a calibrated instrument (Correct answer)
- User seal check performed before each use
- Visual inspection of mask-to-face contact
Correct answer: Quantitative fit test using a calibrated instrument
Quantitative fit testing uses a calibrated instrument to measure actual leakage, providing an objective fit factor rather than relying on the wearer's sensory response.
SAF Personal Protective Equipment 2
Which OSHA standard specifically governs Personal Protective Equipment in general industry?