S-130 Wildland Tools & Equipment 2

Question 1

What is the primary purpose of a fire swatter (flap) in wildland firefighting?

Accepted Answer

Smothering flames on low-intensity ground fires

Answer

A fire swatter is used to beat out and smother flames on low-intensity ground fires, particularly in grass or light fuel.

Question 2

When sharpening a Pulaski in the field, what is the correct filing angle for the axe bit?

Accepted Answer

25 to 30 degrees

Answer

The axe bit of a Pulaski should be filed at approximately 25 to 30 degrees to maintain an effective cutting edge for chopping.

Question 3

Which type of hose is most commonly used for initial attack in wildland firefighting due to its lightweight and flexibility?

Accepted Answer

3/4-inch forestry hose

Answer

3/4-inch lightweight forestry hose is the standard for initial attack because it is easy to pack and maneuver through rough terrain.

Question 4

What does a bladder bag (backpack pump) typically hold in terms of water capacity?

Accepted Answer

5 gallons

Answer

A standard bladder bag holds approximately 5 gallons of water, making it manageable to carry while attacking a fire.

Question 5

Which tool is specifically designed to scrape and scalp burning material away from the edge of a fire?

Accepted Answer

Mcleod

Answer

The McLeod has a wide flat blade on one side for scraping burning material and raking on the other, making it ideal for scalping fire edges.

(S-130) Wildland Firefighting Training Certification Practice Test