Wildland Tools & Equipment Flashcards
7 cards from real S-130 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Wildland Tools & Equipment flashcards as text
What is the primary hazard associated with using a chain saw near the fireline edge?
Answer: Throwing sparks that can ignite fuels outside the controlled area
Chain saws can throw sparks when the chain contacts rocks or other hard objects, creating an ignition risk in adjacent fuels.
Which of the following best describes the 'adze' end of a Pulaski?
Answer: A flat blade used for scraping and grubbing roots horizontally
The adze end of a Pulaski is a wide, flat blade positioned perpendicular to the handle, used for grubbing roots and scraping soil to mineral earth.
When a portable pump loses prime during operations, what is the first corrective action a firefighter should take?
Answer: Check and re-prime the suction hose to eliminate air leaks
Loss of prime is usually caused by an air leak in the suction hose; the first step is to check connections and re-prime the system.
What does the term 'line scout' refer to in the context of hand tool operations?
Answer: A person who walks ahead to identify the best route for fireline construction
A line scout walks ahead of the construction crew to identify terrain, fuel, and safety considerations that determine the best path for the fireline.
What is the minimum width of a hand-constructed fireline typically required to stop the spread of a low-intensity surface fire in light fuels?
Answer: The width of the flame length
Fireline width should be at least as wide as the flame length to prevent spotting across the line; in light fuels this may be as narrow as 18 inches.
A firefighter notices that the Nomex gloves they were issued have burn holes in the palm area. What is the correct action?
Answer: Remove the gloves from service and obtain a replacement pair
Damaged PPE, including Nomex gloves with burn holes, must be removed from service immediately and replaced to maintain firefighter protection.
Which of the following fuels is approved for use in a drip torch for prescribed fire operations?
Answer: A mixture of 1 part diesel to 4 parts gasoline
A standard drip torch mixture is 1 part diesel to 4 parts gasoline (or similar ratios per agency protocol), which provides a controllable burn that clings to fuel.