RTT Traffic Laws & Road Safety Rules 5 — Questions and Answers
Question 1: A motorcyclist is riding on a highway and sees a sign reading 'ROAD WORK NEXT 2 MILES — FINES DOUBLED.' What does this mean?
- Speed limits are removed in the work zone
- Traffic violations carry double the normal fines in the work zone (Correct answer)
- Workers have the right of way over all vehicles
- The speed limit is doubled for faster throughput
Correct answer: Traffic violations carry double the normal fines in the work zone
Work zone laws in every US state impose enhanced fines — typically double — for traffic violations to deter dangerous driving near road workers.
Question 2: What does a yellow center line with a broken white line on the right side indicate for a motorcyclist?
- Passing is permitted from both directions
- Passing is permitted only from the side with the broken line (Correct answer)
- No passing is allowed in either direction
- The road is one-way
Correct answer: Passing is permitted only from the side with the broken line
A broken line alongside a solid line means that passing is allowed only from the side where the broken line appears — the solid line side may not pass.
Question 3: At a roundabout, a motorcyclist entering the circle must yield to:
- All vehicles regardless of position
- Vehicles already circulating inside the roundabout (Correct answer)
- Vehicles entering from the right
- Emergency vehicles only
Correct answer: Vehicles already circulating inside the roundabout
At roundabouts, entering traffic must always yield to vehicles already in the circle, which controls the flow and reduces conflict points.
Question 4: A rider is following a truck on the highway. The truck suddenly slows. What does a long following distance specifically help the rider do?
- Maintain a higher average speed
- See past the truck and have more time to react to hazards (Correct answer)
- Reduce wind buffeting from the truck
- Qualify for fuel savings from drafting
Correct answer: See past the truck and have more time to react to hazards
A longer following distance behind large vehicles gives the rider a better sight line past the truck and more time to react to brake lights, debris, or sudden stops.
Question 5: A motorcyclist riding at night should do which of the following to improve visibility?
- Use high beams at all times including when meeting oncoming traffic
- Increase following distance and reduce speed to match headlight range (Correct answer)
- Ride closer to the vehicle ahead to use their lights
- Disable the low beam to avoid blinding oncoming drivers
Correct answer: Increase following distance and reduce speed to match headlight range
At night, riders should increase following distance and reduce speed so they can stop within the distance illuminated by their headlight — known as 'overdriving the headlights.'
Question 6: Which of the following blood alcohol levels results in automatic DUI charges for a motorcyclist under 21 in most US states?
- 0.08%
- 0.05%
- 0.04%
- Any detectable amount (0.01–0.02%) (Correct answer)
Correct answer: Any detectable amount (0.01–0.02%)
Most US states enforce a zero-tolerance policy for riders under 21, meaning any detectable BAC — often as low as 0.01–0.02% — results in DUI charges.
Question 7: A motorcyclist approaches a yield sign at a highway on-ramp. Traffic on the highway is moving freely with no gaps. The rider should:
- Proceed onto the highway and let highway traffic adjust
- Wait at the yield sign until a safe gap exists, even if stopped (Correct answer)
- Accelerate rapidly to match highway speed and force a gap
- Use the shoulder to merge and then enter traffic
Correct answer: Wait at the yield sign until a safe gap exists, even if stopped
A yield sign requires the rider to give way to existing traffic; if no safe gap exists, the rider must stop and wait until one appears.
RTT Traffic Laws & Road Safety Rules 5
A motorcyclist is riding on a highway and sees a sign reading 'ROAD WORK NEXT 2 MILES — FINES DOUBLED.' What does this mean?