RTT Motorcycle Maintenance & Safety Checks 3

Question 1

What minimum tread depth is generally recommended for motorcycle tires in the US?

Accepted Answer

2/32 inch (1/16 inch)

Answer

Most states require a minimum tread depth of 2/32 inch (1/16 inch) for motorcycle tires, though replacing tires before reaching this limit is recommended for safety.

Question 2

How should you test your motorcycle's turn signals before a ride?

Accepted Answer

Activate each signal and visually confirm front and rear lights flash at correct speed

Answer

Visually confirming that each turn signal flashes at the correct rate front and rear ensures other road users can see your intentions.

Question 3

What does a grinding or metallic scraping noise from the brakes most likely indicate?

Accepted Answer

Brake pads are worn down to the metal backing plate

Answer

Metal-on-metal grinding from brakes means the brake pad material is gone and the metal backing is contacting the rotor, requiring immediate replacement.

Question 4

Which tool is used to accurately measure motorcycle tire pressure?

Accepted Answer

A calibrated tire pressure gauge

Answer

Only a calibrated tire pressure gauge provides an accurate reading; visual inspection and hand pressure tests are unreliable for detecting improper inflation.

Question 5

What is the risk of riding with an over-tightened drive chain?

Accepted Answer

Accelerated wear on the chain, sprockets, and transmission bearings

Answer

An over-tight chain places excessive stress on sprocket teeth, chain links, and transmission output bearings, accelerating wear and risking chain breakage.

(RTT) Riding Theory Test Practice Test

(RTT) Riding Theory Test Practice Test

RTT Motorcycle Maintenance & Safety Checks 3