RTT Motorcycle Handling and Control 5

Question 1

What is the primary cause of a 'speed wobble' on a motorcycle?

Accepted Answer

Imbalanced wheels, improper tire pressure, loose steering head bearings, or poor weight distribution

Answer

Speed wobbles are typically caused by mechanical issues such as wheel imbalance, low tire pressure, worn steering head bearings, or improper loading.

Question 2

When navigating a series of S-curves, what is the best approach?

Accepted Answer

Maintain a consistent pace, look through each curve, and position for the next curve at each exit

Answer

Linking S-curves smoothly requires looking through each curve and positioning at exit to set up optimally for the next one.

Question 3

What is the safest action if your throttle sticks open while riding?

Accepted Answer

Pull in the clutch and apply both brakes, then shut off the engine if needed

Answer

Pulling in the clutch disconnects engine power immediately, allowing both brakes to slow the bike safely without engine resistance complicating the stop.

Question 4

How does increased speed affect the lean angle required to navigate the same curve?

Accepted Answer

Higher speed requires a greater lean angle to produce the centripetal force needed

Answer

At higher speeds, centrifugal force increases, requiring a deeper lean angle to maintain the curved path through the corner.

Question 5

When riding over railroad tracks, what angle of crossing is recommended?

Accepted Answer

At a 45-degree angle or greater to reduce the risk of the tire catching the groove

Answer

Crossing at 45 degrees or greater prevents narrow motorcycle tires from catching in the groove and deflecting the front wheel.

(RTT) Riding Theory Test Practice Test

(RTT) Riding Theory Test Practice Test

RTT Motorcycle Handling and Control 5