Motorcycle Maintenance & Safety Checks Flashcards
7 cards from real RTT practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Motorcycle Maintenance & Safety Checks flashcards as text
What minimum tread depth is generally recommended for motorcycle tires in the US?
Answer: 2/32 inch (1/16 inch)
Most states require a minimum tread depth of 2/32 inch (1/16 inch) for motorcycle tires, though replacing tires before reaching this limit is recommended for safety.
How should you test your motorcycle's turn signals before a ride?
Answer: Activate each signal and visually confirm front and rear lights flash at correct speed
Visually confirming that each turn signal flashes at the correct rate front and rear ensures other road users can see your intentions.
What does a grinding or metallic scraping noise from the brakes most likely indicate?
Answer: Brake pads are worn down to the metal backing plate
Metal-on-metal grinding from brakes means the brake pad material is gone and the metal backing is contacting the rotor, requiring immediate replacement.
Which tool is used to accurately measure motorcycle tire pressure?
Answer: A calibrated tire pressure gauge
Only a calibrated tire pressure gauge provides an accurate reading; visual inspection and hand pressure tests are unreliable for detecting improper inflation.
What is the risk of riding with an over-tightened drive chain?
Answer: Accelerated wear on the chain, sprockets, and transmission bearings
An over-tight chain places excessive stress on sprocket teeth, chain links, and transmission output bearings, accelerating wear and risking chain breakage.
What should be checked when inspecting motorcycle wheel bearings?
Answer: Side-to-side play or roughness when spinning the wheel
Lifting the wheel off the ground and checking for lateral play or grinding roughness when spinning reveals worn or failed wheel bearings.
If your motorcycle's coolant level is consistently dropping without visible leaks, what should you suspect?
Answer: An internal coolant leak into the engine oil
Coolant that disappears without external leaks often indicates an internal leak where coolant enters the combustion chamber or mixes with engine oil, requiring immediate diagnosis.