Renovation Contractors Contractor Safety and OSHA 3

Question 1

What personal protective equipment (PPE) is required when using an angle grinder for cutting masonry?

Accepted Answer

Safety glasses or face shield, hearing protection, and a dust respirator

Answer

Angle grinding on masonry creates flying debris, loud noise, and silica dust, requiring eye/face protection, hearing protection, and respiratory protection.

Question 2

What is the OSHA requirement for a safety data sheet (SDS) for a hazardous chemical used on a renovation site?

Accepted Answer

Make it immediately accessible to all workers who may be exposed

Answer

OSHA requires SDS documents to be readily accessible to all workers during each work shift in their work area when hazardous chemicals are present.

Question 3

Which OSHA standard specifically addresses asbestos exposure in construction renovation work?

Accepted Answer

29 CFR 1926.1101

Answer

OSHA 29 CFR 1926.1101 is the asbestos standard for construction, covering permissible exposure limits, work practices, respiratory protection, and training requirements.

Question 4

What is the OSHA action level for airborne asbestos in construction (fibers per cubic centimeter)?

Accepted Answer

0.1 f/cc

Answer

OSHA's asbestos action level in construction is 0.1 fiber per cubic centimeter as an 8-hour TWA, triggering additional requirements like air monitoring and medical surveillance.

Question 5

When must a contractor post the OSHA Job Safety and Health: It's the Law poster?

Accepted Answer

In a prominent location where all employees can see it

Answer

All employers covered by OSHA must post the official OSHA poster in a conspicuous location where employees can easily see it, informing them of their rights and responsibilities.

Renovation Contractors Practice Test

Renovation Contractors Practice Test

Renovation Contractors Contractor Safety and OSHA 3