Practice Test GeeksRamsay Test Practice Test
← All Ramsay Test Flashcard Decks

Data Interpretation & Analysis Flashcards

7 cards from real Ramsay Test practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Data Interpretation & Analysis flashcards as text

  1. A line graph shows production peaking at noon and dropping by evening. What can you conclude about evening output?

    Answer: It is lower than at noon

    A drop after the noon peak means evening output is lower.

  2. A reading must stay between 90 and 110 units. A gauge shows 115. What is the correct interpretation?

    Answer: The reading is above the acceptable range

    115 exceeds the upper limit of 110, so it is out of range high.

  3. A histogram shows most measurements clustered near 50 mm with few outliers at 70 mm. What does this suggest?

    Answer: Most parts measure close to 50 mm

    Clustering near 50 mm means that value is most common.

  4. A worker compares two pumps: Pump 1 uses 5 kWh/hr, Pump 2 uses 3 kWh/hr. Over 8 hours, how much more energy does Pump 1 use?

    Answer: 16 kWh

    The 2 kWh/hr difference over 8 hours equals 16 kWh.

  5. A control chart point falls outside the upper control limit. What action is typically indicated?

    Answer: Investigate the process for a problem

    A point beyond control limits signals a special cause that should be investigated.

  6. A table shows scrap rates: Line 1 at 3%, Line 2 at 7%, Line 3 at 5%. Which line is most efficient in reducing scrap?

    Answer: Line 1

    Line 1's 3% is the lowest scrap rate, making it most efficient.

  7. A meter reading increases from 1,250 to 1,400. What is the total increase?

    Answer: 150

    1,400 minus 1,250 equals 150.