PITO PITO Workplace Traffic Management & Pedestrian Safety 2 — Questions and Answers
Question 1: What is the maximum safe operating speed typically recommended for forklifts inside a warehouse?
- 15 mph
- 5 mph (Correct answer)
- 10 mph
- 20 mph
Correct answer: 5 mph
Most warehouse safety programs and OSHA guidelines recommend a maximum indoor forklift speed of 5 mph to allow adequate stopping distance.
Question 2: When a forklift must travel in reverse because the load blocks forward vision, the operator should:
- Use the rearview camera only
- Proceed at full speed with horn sounding
- Travel slowly and continuously watch the path of travel (Correct answer)
- Ask a supervisor for approval first
Correct answer: Travel slowly and continuously watch the path of travel
When traveling in reverse, the operator must look in the direction of travel and move slowly to ensure the path is clear of pedestrians and obstacles.
Question 3: Why should forklifts be prohibited from passing under elevated loads carried by another forklift?
- It wastes fuel
- A dropped load could injure the operator below (Correct answer)
- It causes traffic congestion
- OSHA only recommends against it
Correct answer: A dropped load could injure the operator below
An elevated load can fall, and a forklift passing beneath it exposes the operator to a fatal crush hazard.
Question 4: Employees who work near forklift travel zones are required to wear high-visibility vests primarily to:
- Comply with a dress code
- Make them visible to forklift operators (Correct answer)
- Protect against falling objects
- Identify their job role
Correct answer: Make them visible to forklift operators
High-visibility vests ensure that forklift operators can see workers in their path, especially in areas with poor lighting or obstructed sightlines.
Question 5: A forklift operator notices a pedestrian wearing headphones in a travel aisle. The operator should:
- Assume the pedestrian will move and proceed
- Stop the forklift and alert the pedestrian before proceeding (Correct answer)
- Report the pedestrian to HR and continue operating
- Use the backup alarm and drive past quickly
Correct answer: Stop the forklift and alert the pedestrian before proceeding
A pedestrian wearing headphones may not hear warnings, so the operator must stop and ensure the pedestrian is aware before proceeding.
Question 6: What does a red floor zone around machinery in a warehouse typically signify for forklift operators?
- An area to store empty pallets
- A no-entry zone where forklifts are prohibited (Correct answer)
- A fast-travel corridor
- A fueling station boundary
Correct answer: A no-entry zone where forklifts are prohibited
Red floor markings designate restricted or danger zones where forklifts are not permitted to enter due to hazardous equipment or operations.
PITO PITO Workplace Traffic Management & Pedestrian Safety 2
What is the maximum safe operating speed typically recommended for forklifts inside a warehouse?