PASMA Working at Height Regulations 6

Question 1

Under WAHR 2005, can a ladder be used as a working platform for tasks from a tower scaffold?

Accepted Answer

No, a ladder must not be used on a tower scaffold platform as it creates additional height and instability

Answer

Placing a ladder on a tower platform creates an additional working at height risk above the guard rails, introduces instability, and increases the risk of the tower overturning due to the elevated centre of gravity. It is prohibited by PASMA guidance.

Question 2

What does WAHR 2005 Regulation 14 require regarding the provision of information and training?

Accepted Answer

Every person involved in work at height must receive adequate training and instruction appropriate to their role

Answer

Regulation 14 requires employers to ensure that every person who works at height, supervises it, or manages it receives adequate training, information, and instruction appropriate to the work being undertaken.

Question 3

What is 'suspension trauma' and why is it relevant to WAHR 2005?

Accepted Answer

A potentially fatal condition that occurs when a person is suspended motionless in a harness, causing blood pooling in the legs

Answer

Suspension trauma (orthostatic intolerance) can occur when a person is left hanging in a harness after a fall. Blood pools in the legs, reducing circulation to vital organs, and can be fatal within 20-30 minutes. This is why rescue plans with prompt response times are critical.

Question 4

According to HSE statistics, falls from height are consistently one of the top causes of what in the UK construction industry?

Accepted Answer

Workplace fatalities and major injuries

Answer

Falls from height are consistently one of the largest single causes of workplace fatalities and major injuries in the UK construction industry, accounting for approximately 40+ deaths per year across all industries.

Question 5

Under WAHR 2005, who must be consulted when planning work at height?

Accepted Answer

Workers and their representatives, as required by the Safety Representatives and Safety Committees Regulations 1977

Answer

Employers must consult with workers and their safety representatives when planning work at height. This ensures those who will carry out the work can contribute their practical knowledge of the risks and the most effective controls.

PASMA Practice Test

PASMA Practice Test

PASMA Working at Height Regulations 6