PASMA Working at Height Regulations 3

Question 1

Which Act provides the overarching legal framework under which WAHR 2005 sits?

Accepted Answer

The Health and Safety at Work etc. Act 1974

Answer

WAHR 2005 is made under the Health and Safety at Work etc. Act 1974 (HSWA 1974), which is the primary piece of UK health and safety legislation. HSWA 1974 provides the overarching framework for all workplace health and safety regulations.

Question 2

Under WAHR 2005, what must an employer ensure about the place where work at height is performed?

Accepted Answer

That it is safe, stable, of sufficient dimensions, and with suitable conditions

Answer

Every place of work at height must be stable, have sufficient strength for the purpose, have a suitable surface, be of sufficient dimensions to allow safe passage and working, and have suitable environmental conditions.

Question 3

What is a 'fragile surface' under WAHR 2005?

Accepted Answer

A surface that would be liable to fail if any reasonably foreseeable loading were applied to it

Answer

A fragile surface is one that is liable to fail if subjected to a reasonably foreseeable load, such as the weight of a person and any materials they carry. Examples include fibre cement roof sheets, glass roof panels, and corroded metal decking.

Question 4

What additional precaution does WAHR 2005 require near fragile surfaces?

Accepted Answer

Prominent warning notices must be displayed and measures taken to prevent falls through the surface

Answer

Regulation 9 requires that no person goes onto or near a fragile surface unless it is the only practicable option. Warning notices must be displayed, and platforms, coverings, guard rails, or fall arrest systems must be used to prevent falls.

Question 5

Under WAHR 2005, what must be considered regarding the selection of equipment for work at height?

Accepted Answer

The most appropriate equipment for the task, considering risk, duration, and the working environment

Answer

Regulation 7 requires selecting the most suitable equipment by considering the nature, frequency and duration of the work, the risks, the distance of a potential fall, and the conditions at the worksite.

PASMA Practice Test

PASMA Practice Test

PASMA Working at Height Regulations 3