PASMA Tower Assembly Methods 3

Question 1

What does the term 'base height to width ratio' refer to in tower scaffold design?

Accepted Answer

The ratio of the base dimensions to the maximum permitted height of the tower

Answer

The base height to width ratio determines the maximum height a tower can safely reach relative to its narrowest base dimension. For indoor use, the ratio is typically 3.5:1 and for outdoor use 3:1.

Question 2

When using the traditional method of assembly, what is the main disadvantage?

Accepted Answer

There is a period where the operative works without edge protection

Answer

The traditional method requires the operative to stand on a platform without guard rails while installing them, creating a period of unprotected working at height. This is why the AGR and 3T methods are preferred.

Question 3

What is the purpose of a toeboard on a tower scaffold platform?

Accepted Answer

To prevent materials and tools from falling off the platform edge

Answer

Toeboards are at least 150mm high and are fitted at platform edges to prevent loose materials, tools, and debris from falling off the platform and striking people below. This is a requirement under the Work at Height Regulations 2005.

Question 4

What is the recommended maximum height for a standard mobile tower scaffold used by a PASMA trained operative?

Accepted Answer

There is no maximum; it depends on the manufacturer's instruction manual

Answer

There is no single universal maximum height — the permissible height depends on the specific manufacturer's design, the instruction manual, and the base-to-height ratio. Operatives must always follow the manufacturer's guidelines for the specific tower system being used.

Question 5

During assembly, where should tower components be stored before being passed up?

Accepted Answer

Neatly stacked close to the base but clear of the working area

Answer

Components should be stored neatly and close to the tower base for easy access, but clear of walkways and the working area to prevent trip hazards and avoid obstructing emergency access.

PASMA Practice Test

PASMA Practice Test

PASMA Tower Assembly Methods 3