PASMA Stability and Outriggers 4

Question 1

What type of ground is most dangerous for tower scaffold stability?

Accepted Answer

Soft, uncompacted fill or waterlogged ground that can settle or collapse under load

Answer

Soft, uncompacted, or waterlogged ground can settle unevenly under the tower's weight, causing it to lean and potentially overturn. Recently excavated and backfilled ground is particularly dangerous as it may compact unpredictably.

Question 2

How should a tower scaffold be stabilised if it needs to be used near a building opening such as a window?

Accepted Answer

Tie the tower into the building structure using proper fixings, if recommended by the manufacturer

Answer

Tying a tower into an adjacent structure using appropriate fixings (wall ties) can significantly improve stability, effectively eliminating the free-standing height limitation. This must only be done if the manufacturer approves and the structure can support the loads.

Question 3

What is the risk of moving a tower scaffold with the platform loaded with heavy materials?

Accepted Answer

The high centre of gravity makes the tower prone to overturning during movement, especially on uneven ground

Answer

Heavy materials on the platform raise the centre of gravity, making the tower top-heavy and unstable during movement. Uneven ground, bumps, or sudden stops can tip the tower. All materials and persons must be removed before moving.

Question 4

What happens to the stability of a tower scaffold during the assembly process?

Accepted Answer

Stability decreases as the tower gets taller, so the build sequence must maintain the base-to-height ratio at every stage

Answer

As each lift is added, the tower gets taller and the height-to-base ratio changes. The assembly sequence must ensure that at every stage, the tower remains within safe stability limits. Outriggers may need to be fitted before the tower reaches its full height.

Question 5

Why must outriggers be deployed symmetrically around the tower?

Accepted Answer

To ensure equal stability in all directions — asymmetric deployment leaves the tower vulnerable to overturning in the unprotected direction

Answer

Outriggers must be deployed symmetrically to provide balanced stability. If outriggers are only fitted on one side, the tower has different stability characteristics in different directions, leaving it vulnerable to overturning towards the unprotected side.

PASMA Practice Test

PASMA Practice Test

PASMA Stability and Outriggers 4