Vehicle Preparation and Access Flashcards
7 cards from real Paintless Dent Repair practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Vehicle Preparation and Access flashcards as text
What is the primary reason for removing interior door panels before performing PDR on a door?
Answer: To access the backside of the dent with PDR tools
Removing interior panels gives technicians direct access to the backside of the dent, which is essential for pushing the metal back into shape with PDR tools.
Which tool is most commonly used to remove plastic door panel retaining clips without damaging them?
Answer: Trim removal tool (panel pry bar)
Trim removal tools, also called panel poppers or pry bars, are specially designed to release plastic clips without cracking or breaking the panel or clip.
When preparing a vehicle with widespread hail damage for PDR, which panel area is typically addressed first?
Answer: The roof panel
The roof typically receives the highest concentration of hail impacts and is addressed first to establish a systematic workflow pattern across the vehicle.
What is the primary purpose of a PDR access rod when working on a vehicle door?
Answer: To reach the backside of a dent through limited openings
Access rods are long, angled tools inserted through small door frame openings to reach the backside of dents when full panel removal is not practical.
Which component typically needs to be removed to gain PDR access to dents in a vehicle's rear quarter panel?
Answer: The tail light assembly
The tail light assembly is commonly removed to create an access opening into the rear quarter panel cavity where PDR tools can be inserted and manipulated.
Before removing a door panel for PDR access, which electrical component must typically be disconnected first?
Answer: The window regulator and speaker wiring harness
The window regulator and speaker harness connects electronics mounted in the door panel and must be unplugged before the panel can be fully removed.
What is a 'whale tail' PDR rod primarily used for in vehicle access preparation?
Answer: Accessing and working large flat panel areas through small entry points
A whale tail rod features a wide, flat tip that allows technicians to cover large flat panel areas through small access openings, maximizing working area per tool pass.