Tools Flashcards
7 cards from real Paintless Dent Repair practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Tools flashcards as text
What feature distinguishes a 'whale tail' tool from a standard PDR rod?
Answer: A wide, flat blade for broad leverage on large panels
The whale tail's wide flat end spreads force across large, accessible panels like doors and quarter panels.
When choosing a PDR rod length, what is the main consideration?
Answer: Reaching the dent from the available access point
Rod length must be long enough to reach the dent from the nearest entry point with proper leverage.
What is the role of a 'tip stabilizer' or pad on the panel during rod work?
Answer: To support and protect the panel where the rod pivots
A stabilizer pad provides a protected pivot point so leverage doesn't dent or scratch the panel.
Which tool category includes the 'flat bar' used on hoods and roofs?
Answer: Leverage/push rods with flat profiles
Flat bars are push tools that slide into large horizontal panels with limited clearance.
Why do technicians keep a variety of glue tab shapes and sizes?
Answer: To match the tab footprint to the dent's size and contour
Tab size and shape are matched to the dent so the pull force is distributed correctly.
What is a common use for a heat gun in the PDR glue-pulling process?
Answer: Removing residual glue or warming panels for adhesion
Moderate heat helps release leftover glue and can warm cold panels for better adhesion.
A magnetic PDR tool is sometimes used to do what?
Answer: Help locate or hold position on a panel for shallow dents
Magnetic tools can assist with positioning or light manipulation of shallow dents on steel panels.