Tools Flashcards
7 cards from real Paintless Dent Repair practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Tools flashcards as text
Which light source is most commonly preferred for reading dents in modern PDR?
Answer: An adjustable LED PDR light or line light
Adjustable LED line lights provide consistent, portable reflections in any environment.
What is the benefit of a hot-melt glue with a higher temperature rating in glue pulling?
Answer: It grips better on warm panels and stronger pulls
Higher-temp glues offer stronger adhesion suited to warmer panels and tougher pulls.
A 'tab puller' or lifter tool is used together with what?
Answer: Glue tabs adhered to the dent surface
The lifter grips a glued tab and pulls the dent upward from outside the panel.
What is the purpose of a PDR brace or hook tool?
Answer: To reach into tight braced areas like behind reinforcements
Specialty hook and brace tools navigate around internal panel reinforcements to reach hidden dents.
Why might a technician use a denim or rubber knockdown tip instead of metal?
Answer: To reduce the risk of leaving tool marks on the finish
Softer tips lower high spots while protecting the clear coat from marring.
What is a 'blending hammer' designed to do in PDR?
Answer: Smooth and blend small high or low areas during finishing
Blending hammers refine the surface by gently working remaining imperfections flush.
Which accessory protects window glass and seals when inserting door tools?
Answer: A window guard or wedge protector
Window guards shield the glass and seal from scratches as slim tools pass through.