PDR Techniques and Methods Flashcards
6 cards from real Paintless Dent Repair practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 PDR Techniques and Methods flashcards as text
What is the primary goal of the 'pushing' technique in PDR?
Answer: To push metal back to its original position from behind
The pushing technique in PDR involves applying pressure from behind the panel to restore the metal to its original position without damaging the paint.
What does 'blending' refer to in PDR?
Answer: Feathering the repaired area so it matches surrounding metal contours
Blending in PDR means working the metal edges of a repair so the transition between repaired and undamaged areas is smooth and invisible.
Which PDR method uses a rod inserted through an existing opening rather than drilling access holes?
Answer: Port access technique
Port access technique involves routing PDR rods through pre-existing openings such as window frames, door jambs, or light housings to reach dent areas.
When should a PDR technician use the 'tap-down' method?
Answer: To flatten high spots or crowns around a dent
The tap-down method is used to flatten raised high spots or crowns that form around the perimeter of a dent during the repair process.
What is 'overpush' in PDR terminology?
Answer: Pushing the metal beyond its original position creating a high spot
An overpush occurs when the technician pushes the metal past its correct level, creating a raised high spot that then requires corrective work.
Which technique is most appropriate for repairing a large shallow dent on a door panel?
Answer: Slow graduated pressure from the center outward
Large shallow dents respond best to slow, graduated pressure applied from the center outward in a spiral or grid pattern to gradually work the metal back.