SPD - Sterile Processing Department Technician Sterile Storage and Transport Questions and Answers

Question 1

A sterile storage area must be maintained with specific environmental controls to preserve the integrity of sterile packages. Which of the following conditions is compliant with AAMI standards?

Accepted Answer

Temperature at 72°F and humidity at 50%

Answer

According to AAMI ST79 and other guiding standards, sterile storage areas should have a temperature between 68°F–73°F and relative humidity between 30%–60%. Positive air pressure is required to prevent airborne contaminants from entering the clean space.

Question 2

When placing sterile items on storage shelves, what are the minimum required clearances from the floor, the ceiling (or sprinkler head), and an outside wall?

Accepted Answer

8-10 inches from floor, 18 inches from sprinkler head, 2 inches from wall

Answer

To ensure proper air circulation, facilitate cleaning, and comply with fire codes, sterile supplies must be stored at least 8 to 10 inches from the floor, 18 inches from a sprinkler head (or 5 inches from a plain ceiling), and 2 inches from an outside wall.

Question 3

A technician drops a wrapped tray on the floor. Upon inspection, there are no visible tears or punctures in the wrap. The hospital follows an event-related sterility policy. What is the appropriate action?

Accepted Answer

Consider the item contaminated and send it for reprocessing.

Answer

Event-related sterility maintains that an item is sterile until an event compromises the package integrity. Dropping a package on the floor is considered a contamination event because the impact can stress the package seals and fibers, potentially creating microscopic breaches, even if no damage is visible. The package should be considered contaminated and reprocessed.

Question 4

When transporting sterile instrument trays from the Sterile Processing Department to the Operating Room on a case cart, which of the following is a critical best practice?

Accepted Answer

Ensuring the cart has a solid bottom shelf and is covered.

Answer

Transport carts for sterile items should be covered or enclosed to protect packages from environmental contaminants and accidental contact. The bottom shelf should be solid to prevent any potential contamination from splashing up from the floor.

Question 5

A hospital's sterile supply stock is managed to ensure that older items are used before newer ones. This practice minimizes waste and ensures that items with the earliest sterilization dates are used first. This inventory management method is known as:

Accepted Answer

FIFO (First-In, First-Out)

Answer

FIFO (First-In, First-Out) is the standard stock rotation principle used for sterile supplies. It ensures that the items that were sterilized first are used first, preventing items from sitting on shelves for extended periods and potentially being unnecessarily reprocessed.

SPD - Sterile Processing Department Technician Certification Practice Test

SPD - Sterile Processing Department Technician Certification Practice Test

SPD - Sterile Processing Department Technician Sterile Storage and Transport Questions and Answers