SPD - Sterile Processing Department Technician High-Level Disinfection Questions and Answers

Question 1

An SPD technician is reprocessing a flexible gastroscope. After thorough manual cleaning, what is the next critical step BEFORE immersing the scope in the high-level disinfectant solution?

Accepted Answer

Perform a leak test.

Answer

Leak testing must be performed after manual cleaning but before immersion in a high-level disinfectant. This step is crucial to verify that the internal and external sheaths of the endoscope are intact. A leak could allow fluid to enter internal components, causing significant damage and preventing effective disinfection.

Question 2

What is the primary purpose of performing a Minimum Effective Concentration (MEC) test on a reusable high-level disinfectant solution?

Accepted Answer

To confirm the disinfectant is still potent enough to kill microorganisms.

Answer

The Minimum Effective Concentration (MEC) test is a quality control measure to ensure that the active ingredient in a reusable high-level disinfectant has not been diluted below the manufacturer-specified level required for effective disinfection. With repeated use, the solution can become diluted and less potent.

Question 3

According to the Spaulding Classification system, high-level disinfection is the required processing method for which category of medical devices?

Accepted Answer

Semi-critical items that contact mucous membranes or non-intact skin.

Answer

The Spaulding Classification categorizes devices based on infection risk. Semi-critical items, such as endoscopes and respiratory therapy equipment, contact mucous membranes or non-intact skin and require, at a minimum, high-level disinfection to eliminate all vegetative microorganisms, mycobacteria, and viruses.

Question 4

A technician is manually disinfecting an instrument using a glutaraldehyde solution. Which of the following safety precautions is MOST critical?

Accepted Answer

Using the chemical in a well-ventilated area or under a local exhaust hood.

Answer

Glutaraldehyde releases vapors that are irritating to the respiratory system, eyes, and skin. OSHA has established recommended exposure limits for this chemical. To protect employees, it is critical to use glutaraldehyde in a well-ventilated area, preferably with a dedicated local exhaust ventilation system, to minimize inhalation of fumes.

Question 5

Which of the following is a mandatory final step for a flexible endoscope after it has undergone high-level disinfection and thorough rinsing, but before it is stored?

Accepted Answer

Flushing all channels with 70% isopropyl alcohol followed by forced, filtered air.

Answer

Proper drying is essential to prevent the growth of waterborne microorganisms during storage. Flushing the channels with 70% isopropyl alcohol aids in displacing water and facilitates rapid evaporation. Following this with forced, filtered air ensures all moisture is removed from the internal channels before the scope is hung for storage.

SPD - Sterile Processing Department Technician Certification Practice Test

SPD - Sterile Processing Department Technician Certification Practice Test

SPD - Sterile Processing Department Technician High-Level Disinfection Questions and Answers