RST Therapeutic Interventions and Titration Questions and Answers

Question 1

A 45-year-old male on a CPAP titration study continues to have obstructive hypopneas and loud snoring at a pressure of 14 cm H2O. The technologist increases the pressure to 15 cm H2O, but the patient awakens and complains of difficulty exhaling. According to AASM guidelines, what is the most appropriate next step?

Accepted Answer

Switch to Bi-level PAP therapy.

Answer

The AASM guidelines recommend considering a switch to Bi-level PAP when CPAP pressures reach high levels (e.g., 15 cm H2O) and are associated with patient intolerance or persistent events. The patient's complaint of difficulty exhaling is a classic sign of pressure intolerance that Bi-level PAP, with its lower expiratory pressure (EPAP) and higher inspiratory pressure (IPAP), is designed to address.

Question 2

Which of the following conditions is a primary contraindication for the use of Adaptive Servo-Ventilation (ASV) therapy?

Accepted Answer

Chronic, symptomatic heart failure with reduced left ventricular ejection fraction (LVEF ≤ 45%).

Answer

ASV therapy is contraindicated in patients with chronic, symptomatic heart failure (NYHA 2-4) with a reduced left ventricular ejection fraction (LVEF ≤ 45%). The SERVE-HF trial found an increased risk of cardiovascular mortality in this specific patient population when treated with ASV. The other conditions are potential indications for ASV therapy.

Question 3

According to AASM guidelines, supplemental oxygen should be initiated and titrated during a PAP study under which of the following conditions?

Accepted Answer

The patient's SpO2 is consistently ≤ 88% for at least 5 minutes despite an optimally titrated PAP pressure that has eliminated respiratory events.

Answer

The AASM guidelines state that supplemental oxygen may be added during a PAP titration when the SpO2 is ≤ 88% for 5 minutes or longer in the absence of obstructive respiratory events. This ensures that the hypoxemia is not a result of airway obstruction that could be resolved by increasing PAP pressure. Oxygen is initiated at 1 L/min and titrated to maintain SpO2 between 88% and 94%.

Question 4

During a Bi-level PAP titration for obstructive sleep apnea, the technologist has set the EPAP to 8 cm H2O, which has eliminated apneas. However, the patient continues to have obstructive hypopneas and snoring. What is the correct action to resolve the remaining events?

Accepted Answer

Increase the IPAP to 12 cm H2O.

Answer

In Bi-level PAP titration, EPAP is primarily titrated to eliminate obstructive apneas. Once apneas are resolved, IPAP is then increased to eliminate hypopneas, snoring, and RERAs. Increasing the IPAP while keeping the EPAP stable increases the pressure support (the difference between IPAP and EPAP) and addresses the less severe respiratory events.

Question 5

Which of the following best defines an "optimal" PAP titration according to AASM guidelines?

Accepted Answer

The RDI is reduced to < 5 events/hour for at least 15 minutes, including supine REM sleep.

Answer

An optimal titration is achieved when the Respiratory Disturbance Index (RDI), which includes apneas, hypopneas, and RERAs, is reduced to less than 5 events per hour for at least a 15-minute duration. Critically, this period must include sleep in the supine position and REM sleep, as sleep-disordered breathing is often at its worst under these conditions. The SpO2 should also be above 90%.

RST - Registered Sleep Technologist Practice Test

RST - Registered Sleep Technologist Practice Test

RST Therapeutic Interventions and Titration Questions and Answers