PASMA Safe Use of Platforms

Question 1

What is the maximum safe working load (SWL) that can be placed on a tower scaffold platform?

Accepted Answer

The load specified by the manufacturer in the instruction manual for that specific tower configuration

Answer

The safe working load is specified by the manufacturer and varies by tower model, configuration, and height. It includes the weight of all persons, tools, materials, and equipment on the platform. Exceeding the SWL risks structural failure.

Question 2

What must an operative do before stepping onto a tower scaffold platform?

Accepted Answer

Verify that the tower has been inspected, all brakes are locked, and the platform is fully boarded with guard rails in place

Answer

Before use, the operative should verify the tower has a current inspection tag (green), all castor brakes are locked, the platform is fully decked with no gaps, guard rails and toeboards are in place, and the tower appears stable and plumb.

Question 3

Is it permissible to use a hop-up or step-up platform on top of a tower scaffold platform?

Accepted Answer

No — working above the guard rails defeats the fall protection and increases the overturning moment

Answer

Using any device to gain additional height above the guard rails places the operative above the level of fall protection. It also raises the centre of gravity, increasing the risk of overturning. This practice is prohibited by PASMA guidance.

Question 4

What is the correct way to lift tools and materials to a tower scaffold platform?

Accepted Answer

Use an internal lifting method such as hand-to-hand passing, or a gin wheel/rope for heavier items

Answer

Light items can be passed hand-to-hand through the internal ladder access. Heavier items should be lifted using a gin wheel (small pulley and rope system). Workers should never climb while carrying items as they need both hands free for safe climbing.

Question 5

Why must the trapdoor platform hatch be closed after climbing through?

Accepted Answer

To provide a full working platform and prevent trip or fall hazards through the open hatch

Answer

An open trapdoor creates a fall hazard (someone could step into the opening) and a trip hazard (the raised hatch). Closing it creates a complete platform surface, maximising the working area and eliminating these risks.

PASMA Practice Test

PASMA Practice Test

PASMA Safe Use of Platforms