Part P Building Regulations Part P

Question 1

Under Building Regulations Part P, which of the following types of electrical work in a dwelling is classified as notifiable?

Accepted Answer

Installing a new circuit in a kitchen

Answer

Installing a new circuit anywhere in a dwelling is notifiable work under Part P and must be either carried out by a registered competent person (e.g., registered with NICEIC, NAPIT, or ELECSA) or notified to the local Building Control Body before work commences. Kitchens are also special locations, making this doubly notifiable.

Question 2

Which of the following is NOT a recognised competent person scheme for self-certification of electrical work under Part P?

Accepted Answer

City & Guilds

Answer

City & Guilds is an awarding body for qualifications, not a competent person scheme. The recognised competent person schemes that allow self-certification of notifiable electrical work under Part P include NICEIC, NAPIT, ELECSA, and others approved by the Secretary of State. Registration with a scheme allows electricians to self-certify without involving Building Control.

Question 3

What is the maximum penalty for carrying out notifiable electrical work without notification or competent person registration under Part P?

Accepted Answer

Up to £50,000 fine and potential prosecution

Answer

Non-compliance with Building Regulations Part P can result in prosecution by the local authority with fines of up to £50,000 in a magistrates' court. Additionally, the homeowner may be required to have the work inspected and potentially removed or corrected, and it can cause problems when selling the property if a Building Regulations compliance certificate cannot be produced.

Question 4

Under Part P, which special location in a dwelling always requires notifiable work if new circuits or consumer unit changes are involved?

Accepted Answer

Bathrooms, kitchens, and gardens/outdoors

Answer

Bathrooms, kitchens, and outdoor locations are classified as special locations under Part P. Any new circuit work, consumer unit replacement, or installation of equipment in these areas is notifiable. This is because these locations present increased risk of electric shock due to the presence of water, damp conditions, or reduced body resistance.

Question 5

A homeowner wants to replace their consumer unit (fuse board). Under Part P, what is required?

Accepted Answer

The work is notifiable and must be done by a registered competent person or notified to Building Control

Answer

Consumer unit replacement is always notifiable work under Part P (Approved Document P, 2013 edition). It must be carried out by a Part P registered competent person who can self-certify, or alternatively, a Building Control notification must be made. The new consumer unit must comply with BS 7671 and include RCD protection as required by the 18th Edition.

Part P Electrical Practice Test

Part P Electrical Practice Test

Part P Building Regulations Part P