LEED - Leadership in Energy and Environmental Design Integrative Process and Strategies Questions and Answers

Question 1

During the 'Discovery' phase of the Integrative Process, what is the primary purpose of performing a preliminary water budget analysis?

Accepted Answer

To inform the Owner's Project Requirements (OPR) and Basis of Design (BOD) by understanding water demand and potential non-potable sources.

Answer

The preliminary water budget analysis, conducted before the schematic design is complete, is a discovery tool. Its purpose is to quantify the project's potential water demand (indoor, outdoor, process) and assess available non-potable water sources. This early analysis helps the team identify synergies and inform the OPR and BOD with realistic, high-performance water-related goals.

Question 2

A project team is pursuing the Integrative Process (IP) credit. Before completing the schematic design, they must perform a 'simple box' energy model. Which of the following is a key objective of this analysis?

Accepted Answer

To assess strategies related to massing, orientation, and basic envelope attributes to inform the design.

Answer

The 'simple box' energy model is a preliminary analysis used early in the design process (before schematic design is complete) to understand the building's energy loads and how major design decisions will impact energy consumption. It allows the team to assess and question default assumptions about massing, orientation, envelope, lighting, and other factors to find opportunities for energy load reduction.

Question 3

Which of the following best describes the relationship between the 'Discovery' and 'Implementation' phases of the Integrative Process credit?

Accepted Answer

The 'Discovery' phase involves analysis that informs the design decisions documented in the 'Implementation' phase.

Answer

The LEED IP credit is structured into two main parts: Discovery and Implementation. The Discovery phase requires teams to perform analyses (like the simple box energy model and water budget analysis) to find opportunities for synergy and improved performance. The Implementation phase requires the team to document how the findings from the Discovery phase actually informed the project's design, including the OPR and BOD.

Question 4

A project team is holding its initial goal-setting workshop as part of the Integrative Process. Which of these activities is MOST critical to the success of this workshop?

Accepted Answer

Ensuring all key project team members and stakeholders are present and engaged.

Answer

The intent of the Integrative Process is to foster collaboration and communication among all project stakeholders from the very beginning. The goal-setting workshop is a key event where findings from preliminary analyses are shared, performance targets are set, and responsibilities are identified. The success of this collaborative effort depends on having all principal team members and stakeholders engaged in the process.

Question 5

The LEED Integrative Process is based on a standard developed by which organization?

Accepted Answer

American National Standards Institute (ANSI)

Answer

The LEED v4 credit for Integrative Process is based on the principles outlined in the ANSI Consensus National Standard Guide 2.0 for Design and Construction of Sustainable Buildings and Communities. This guide provides the framework for practicing integrative design.

LEED - Leadership in Energy and Environmental Design Certification Practice Test

LEED - Leadership in Energy and Environmental Design Certification Practice Test

LEED - Leadership in Energy and Environmental Design Integrative Process and Strategies Questions and Answers