IHS - International Hearing Society Verification and Validation Methods Questions and Answers

Question 1

A client returns for a follow-up appointment two weeks after being fitted with new hearing aids. The practitioner wants to use a standardized questionnaire to efficiently assess the overall success of the fitting, including daily use, benefit, satisfaction, and quality of life. Which of the following validation tools is most suitable for this purpose?

Accepted Answer

International Outcome Inventory for Hearing Aids (IOI-HA)

Answer

The International Outcome Inventory for Hearing Aids (IOI-HA) is a widely used post-fitting validation tool designed to assess multiple domains of success, including daily use, benefit, satisfaction, and overall quality of life. REIG is an objective verification measure, the HHIE-S is typically a pre-fitting screening tool, and otoscopy is a physical examination of the ear.

Question 2

In probe microphone measurements, what does the Real Ear Aided Response (REAR) represent?

Accepted Answer

The sound pressure level at the eardrum for a specific input signal with the hearing aid turned on and in place.

Answer

The REAR is the fundamental measurement of the sound pressure level (SPL) across frequencies at the tympanic membrane with the hearing aid in the ear and turned on. It shows exactly what the eardrum is receiving from the amplified signal, making it a critical verification measure.

Question 3

A patient is skeptical about the benefit of directional microphone technology in their new hearing aids. Which of the following verification procedures would be the most effective objective demonstration of this feature?

Accepted Answer

Comparing speech mapping results with a signal from the front (0° azimuth) versus a signal from the rear (180° azimuth).

Answer

Comparing the hearing aid's output on a speech map for sounds originating from the front versus sounds from the rear provides a direct, visual, and objective demonstration of how the directional microphones are attenuating noise from behind the listener. This is the most effective way to verify this feature's function in the patient's ear.

Question 4

Which of the following is considered a method of hearing aid validation, not verification?

Accepted Answer

Using the Client Oriented Scale of Improvement (COSI).

Answer

Validation assesses whether the hearing aid is meeting the patient's real-world needs. The COSI is a subjective outcome measure where the client identifies specific listening goals and then rates their improvement, making it a pure validation tool. The other options are all objective measurements of the hearing aid's performance, which are forms of verification.

Question 5

A client fitted using a prescriptive formula reports that speech is clear, but certain environmental sounds, like running water or a kitchen fan, are uncomfortably loud. The initial verification was performed using only an average speech signal. What is the most appropriate next step using real-ear verification?

Accepted Answer

Measure the Real Ear Aided Response for a loud input (e.g., REAR85 or REAR90) to check the MPO setting.

Answer

The client's complaint is specific to loud sounds, not average speech. The Maximum Power Output (MPO) of the hearing aid controls the ceiling for loud inputs. The correct verification step is to measure the output in the ear using a loud input signal (like 85 or 90 dB SPL) to ensure the MPO is set to a level that is safe and comfortable for the user.

IHS - International Hearing Society Practice Test

IHS - International Hearing Society Practice Test

IHS - International Hearing Society Verification and Validation Methods Questions and Answers