IHS - International Hearing Society Hearing Instrument Fitting Questions and Answers

Question 1

A client with a severe-to-profound, steeply-sloping sensorineural hearing loss requires a new BTE hearing aid. To prevent acoustic feedback and provide adequate low-frequency gain, which of the following earmold characteristics is most appropriate?

Accepted Answer

A soft silicone material with no vent and a long canal

Answer

For a severe-to-profound hearing loss, a tight acoustic seal is critical to deliver high levels of amplification without causing feedback and to properly amplify low-frequency sounds. A soft silicone material provides a better seal than hard acrylic. A non-vented (occluding) earmold with a long canal maximizes the seal, prevents feedback, and ensures low-frequency energy is delivered effectively to the eardrum. Large vents or open domes are inappropriate as they would allow sound to leak out, causing significant feedback and reducing low-frequency amplification.

Question 2

A new hearing aid user complains that their own voice sounds loud and hollow, as if they are 'talking in a barrel.' This client has good low-frequency hearing. Which of the following is the MOST common and effective modification to alleviate this complaint?

Accepted Answer

Increasing the size of the vent or adding a vent.

Answer

The client is describing the occlusion effect, which is common in new users with good low-frequency hearing when their ear canal is blocked. The most effective way to reduce the occlusion effect is to increase venting. A larger vent allows the low-frequency, bone-conducted sounds of the user's own voice to escape the ear canal instead of being trapped and over-amplified.

Question 3

What is the primary purpose of measuring the Real Ear to Coupler Difference (RECD) during a hearing instrument fitting, especially for pediatric patients?

Accepted Answer

To account for the individual's ear canal acoustics, allowing for precise verification without requiring the patient to be present for the entire measurement.

Answer

The RECD measures the difference between the sound pressure level in a standardized 2cc coupler and the individual's actual ear canal. This measurement is crucial because it captures the unique acoustical properties of the patient's ear. It is especially valuable in pediatrics because children have smaller ear canals which can significantly alter the sound pressure level. By applying the RECD, the fitter can accurately verify the hearing aid's output in a test box, simulating the real-ear response without needing the child to remain still for extended probe microphone measures.

Question 4

During a follow-up appointment, a client reports that while the hearing aids are helpful in quiet settings, they still struggle significantly to understand conversations in a noisy restaurant. Which verification measurement would be most effective to objectively demonstrate the benefit of the hearing aid's noise reduction technology?

Accepted Answer

Real-ear measurement with a speech-in-noise signal, comparing directional microphone and noise reduction feature activation.

Answer

Real-ear measurement using a speech-in-noise signal is the most effective way to objectively verify the performance of features like directional microphones and digital noise reduction. By presenting speech from the front and noise from other directions, the fitter can measure the improvement in the signal-to-noise ratio when these features are activated, providing objective proof of their function and benefit in challenging listening environments. Functional gain measures improvement in quiet thresholds, not performance in noise.

Question 5

Which of the following best describes the difference between hearing aid verification and validation?

Accepted Answer

Verification is the objective measurement of the hearing aid's acoustic output in the ear, while validation is the subjective assessment of the client's perceived benefit.

Answer

Verification involves objective, electroacoustic measurements to ensure the hearing aid is meeting a specific prescriptive target. The most common method is real-ear measurement (probe microphone measurement). Validation, on the other hand, is subjective and measures how well the hearing aid is meeting the client's real-world needs and expectations. This is typically assessed using self-report questionnaires (like the COSI or APHAB) or aided speech-in-noise testing.

IHS - International Hearing Society Practice Test

IHS - International Hearing Society Practice Test

IHS - International Hearing Society Hearing Instrument Fitting Questions and Answers