FREE SPD Instrument Inspection Questions and Answers

Question 1

Why is instrument inspection important in SPD?

Accepted Answer

To ensure instruments are ready for sterilization and meet quality standards

Answer

Instrument inspection is vital in SPD to verify that instruments are meticulously clean, fully functional, and free from damage before sterilization. This step ensures that only high-quality, safe, and effective instruments are presented for patient use, preventing potential surgical delays or patient harm due to faulty equipment. It's a critical quality control point in the reprocessing cycle.

Question 2

What tool is commonly used to inspect small or hard-to-see areas of surgical instruments?

Accepted Answer

Magnifying glass or lighted magnifier

Answer

A magnifying glass or lighted magnifier is an essential tool for inspecting small or hard-to-see areas of surgical instruments. These tools allow SPD technicians to thoroughly check for residual soil, corrosion, cracks, or other damage that might be missed by the naked eye. This detailed inspection ensures instruments are truly clean and intact before sterilization.

Question 3

Which of the following is NOT a focus during instrument inspection?

Accepted Answer

Ensuring proper labeling

Answer

While labeling is important for identification and tracking, ensuring proper labeling is typically part of the assembly and packaging stage, not the physical inspection of the instrument itself. Instrument inspection focuses on the physical integrity and operational status of the device, checking for cleanliness, functionality, and physical damage to ensure it's fit for use.

Question 4

During inspection, what should be done if an instrument is found to be damaged?

Accepted Answer

Remove it from the set and tag it for repair or replacement

Answer

If an instrument is found to be damaged during inspection, it must be immediately removed from the set and tagged for repair or replacement. Damaged instruments can compromise patient safety or surgical outcomes if used. They should never be sterilized or returned to the clinical area without proper repair or replacement, adhering to strict safety protocols.

Question 5

What is the recommended way to test the sharpness of scissors during inspection?

Accepted Answer

Perform a test cut on material (e.g., yellow test card)

Answer

The recommended way to test the sharpness of scissors during inspection is to perform a test cut on appropriate material, such as a yellow test card or specific scissor testing material. This method objectively verifies that the blades cut cleanly and smoothly without snagging or tearing. This ensures they are fit for surgical use and will perform as expected.

SPD - Sterile Processing Department Technician Certification Practice Test

SPD - Sterile Processing Department Technician Certification Practice Test

FREE SPD Instrument Inspection Questions and Answers