FREE CCTV CCTV Installation and Maintenance Questions and Answers

Question 1

A technician installs an analog HD-over-Coax camera 150 meters from the DVR using RG59 coaxial cable. The video feed appears distorted with rolling lines and color loss. What is the most likely cause of this issue?

Accepted Answer

Voltage drop due to excessive cable length.

Answer

Over long distances, the resistance of a coaxial cable like RG59 can cause a significant drop in voltage, especially on siamese cables that carry both power and video. Insufficient power reaching the camera prevents it from operating correctly, leading to symptoms like rolling lines, color loss, or a complete loss of signal. While poor termination can cause signal loss, the distance makes voltage drop the most probable culprit.

Question 2

During a routine maintenance visit for a large outdoor CCTV system, which of the following tasks is MOST critical for ensuring consistent image clarity, especially for cameras housed in protective domes?

Accepted Answer

Cleaning the exterior and interior of the camera dome/housing.

Answer

Over time, dust, pollen, water spots, and insects can accumulate on the exterior of the camera housing or dome, obstructing the lens and causing blurry or unfocused images. This is a fundamental physical maintenance task essential for maintaining image clarity. While other tasks are important for system health, a dirty lens directly and immediately impacts the primary function of the camera.

Question 3

An installer is setting up 50 IP cameras on a dedicated security VLAN that is separate from the main corporate network. To ensure reliable and predictable communication, what is the best practice for assigning IP addresses to the cameras and the NVR?

Accepted Answer

Assign static IP addresses to all cameras and the NVR.

Answer

Using static IP addresses for critical infrastructure like security cameras and NVRs is a best practice. It ensures that the VMS/NVR always knows the exact address of each camera, preventing communication loss that could occur if a DHCP server reassigns an address. This simplifies troubleshooting, management, and ensures the NVR can consistently connect to and record from each camera without fail.

Question 4

Which of the following is an essential safety precaution to protect an outdoor PTZ camera and its associated wiring from damage caused by lightning strikes?

Accepted Answer

Installing a properly grounded surge protection device.

Answer

Surge protectors are designed to divert the excessive voltage from a power surge or a nearby lightning strike to the ground, protecting the sensitive electronic equipment connected to the line. Proper grounding is the critical component that allows the surge protector to safely dissipate the harmful energy away from the camera.

Question 5

A user reports that the video from a specific IP camera is intermittently freezing and showing pixelation, while other cameras on the same network switch are working perfectly. The technician has already verified the camera's power supply. What is the next logical step in troubleshooting this issue?

Accepted Answer

Re-terminate the network cable at both the camera and switch ends.

Answer

Intermittent freezing and pixelation on a single camera often point to a data transmission problem, such as packet loss or a physical layer network issue. A poorly terminated network cable (e.g., a bad crimp on an RJ45 connector, or wires not in the correct order) is a very common cause of such issues. Since other cameras on the same switch are fine, it helps isolate the problem to the specific camera or its direct connection.

CCTV - Closed Circuit Television Practice Test

CCTV - Closed Circuit Television Practice Test

FREE CCTV CCTV Installation and Maintenance Questions and Answers