EGSA Generator and Alternator Principles Questions and Answers

Question 1

A technician is troubleshooting a self-excited generator that fails to build up any voltage when started. The prime mover is confirmed to be operating at the correct speed. Which of the following is the most likely initial cause for this failure?

Accepted Answer

Loss of residual magnetism in the field poles.

Answer

For a self-excited generator to begin producing voltage, there must be a small amount of magnetism remaining in the iron cores of the field poles. This 'residual magnetism' creates a weak initial magnetic field that induces a small voltage in the armature windings as the generator spins. This small voltage then supplies current to the field windings, which strengthens the magnetic field, inducing more voltage, and so on, until the rated output voltage is achieved. Without residual magnetism, this process cannot start.

Question 2

What is the primary function of an Automatic Voltage Regulator (AVR) in an alternator?

Accepted Answer

To maintain a constant output voltage under varying loads.

Answer

The Automatic Voltage Regulator (AVR) continuously monitors the alternator's output voltage. It maintains a constant voltage level by adjusting the DC current supplied to the exciter field, which in turn controls the strength of the main rotor's magnetic field. As the electrical load on the generator changes, the AVR compensates to keep the output voltage stable.

Question 3

A 4-pole alternator is operating at a speed of 1800 RPM. What is the frequency of the generated AC voltage?

Accepted Answer

60 Hz

Answer

The relationship between frequency (f), the number of poles (P), and the synchronous speed (N) in RPM is given by the formula: f = (N * P) / 120. In this case, N = 1800 RPM and P = 4 poles. So, f = (1800 * 4) / 120 = 7200 / 120 = 60 Hz.

Question 4

Which of the following principles is used to determine the direction of induced current in the conductors of a generator's armature?

Accepted Answer

Fleming's Right-Hand Rule

Answer

Fleming's Right-Hand Rule is specifically for generators. It relates the direction of motion of a conductor, the direction of the magnetic field, and the direction of the induced current. The thumb represents the direction of motion, the forefinger represents the magnetic field (North to South), and the middle finger indicates the direction of the induced current.

Question 5

In a synchronous generator, what is the purpose of the damper windings (or amortisseur windings) located in the rotor pole faces?

Accepted Answer

To dampen rotor oscillations and assist in starting.

Answer

Damper windings are squirrel-cage-like windings that oppose changes in rotor speed relative to the synchronous speed. Their primary function is to dampen oscillations (a phenomenon called 'hunting') caused by sudden load changes, thereby improving system stability. They also provide the starting torque for synchronous motors, allowing them to start as induction motors.

(EGSA) Electrical Generating Systems Association Certified Practice Test

(EGSA) Electrical Generating Systems Association Certified Practice Test

EGSA Generator and Alternator Principles Questions and Answers