EFDA - Expanded Function Dental Auxiliary Impression Materials and Techniques Questions and Answers

Question 1

An EFDA is taking a final impression for a single crown. Upon removing the impression, they notice a "drag" or "pull" distortion near the margin of the prepared tooth. What is the most likely cause of this specific error?

Accepted Answer

The impression material began to set while the tray was being seated.

Answer

A "drag" or "pull" occurs when the impression material has started its setting reaction but is disturbed before it is complete. Seating the tray while the material is already partially set forces the material to flow under pressure, causing internal stress and distortion.

Question 2

Which of the following impression materials is classified as an irreversible hydrocolloid and is primarily used for diagnostic casts, preliminary impressions for custom trays, and opposing arch models?

Accepted Answer

Alginate

Answer

Alginate is an irreversible hydrocolloid material. Its ease of use and lower cost make it ideal for applications where high precision is not the primary requirement, such as study models (diagnostic casts) and preliminary impressions.

Question 3

An EFDA has just taken an alginate impression. To ensure maximum dimensional accuracy before pouring the model, what is the most appropriate next step?

Accepted Answer

Disinfect the impression, rinse, and pour it immediately or store it in 100% humidity.

Answer

Alginate impressions are highly susceptible to dimensional changes. They can lose water and shrink (syneresis) or absorb water and swell (imbibition). The best practice is to pour the impression immediately after disinfection. If pouring must be delayed, storing it in a sealed bag with a damp paper towel (100% humidity) is the next best option to minimize distortion.

Question 4

A dentist requires a highly accurate and dimensionally stable final impression for a three-unit bridge. The material must have excellent tear strength and allow for multiple pours of the model if needed. Which material best fits this description?

Accepted Answer

Polyvinyl siloxane (PVS)

Answer

Polyvinyl siloxane (PVS), also known as addition silicone, is known for its superior dimensional stability, high accuracy, and excellent tear strength. Its stability allows impressions to be poured long after they are taken and enables multiple accurate casts to be made from a single impression.

Question 5

When an EFDA dispenses material for a bite registration, what is the primary goal of this procedure?

Accepted Answer

To record the occlusal relationship between the maxillary and mandibular arches in centric occlusion.

Answer

A bite registration is taken to accurately record how the patient's upper and lower teeth occlude (come together). This record is essential for the dental laboratory to correctly mount the stone casts on an articulator, ensuring the final prosthesis will have the correct bite.

(EFDA) Expanded Function Dental Auxiliary Practice Test

(EFDA) Expanded Function Dental Auxiliary Practice Test

EFDA - Expanded Function Dental Auxiliary Impression Materials and Techniques Questions and Answers