CPSI Equipment and Site Design Requirements Questions and Answers 2

Question 1

What is the minimum use zone radius required around stationary playground equipment?

Accepted Answer

6 feet

Answer

ASTM F1487 and CPSC guidelines require a minimum 6-foot use zone in all directions around stationary playground equipment.

Question 2

How is the use zone for swings calculated for the front and back?

Accepted Answer

2 times the height of the pivot point in front and back, and 6 feet to the sides

Answer

Swing use zones extend 2 times the height of the pivot point in front and behind the swing, and at least 6 feet to the sides.

Question 3

What is the minimum overhead clearance required between the ground and any overhead component on playground equipment?

Accepted Answer

7 feet

Answer

ASTM F1487 requires a minimum 7-foot clearance between the ground and overhead components to prevent adults and older children from striking their heads.

Question 4

What is the minimum separation distance required between two adjacent pieces of playground equipment?

Accepted Answer

Use zones of adjacent equipment must not overlap, requiring adequate separation between equipment

Answer

Use zones of adjacent equipment must not overlap — equipment must be spaced far enough apart that their individual use zones remain separate.

Question 5

What site design consideration is most critical for preventing children from running into traffic areas from the playground?

Accepted Answer

Providing physical barriers such as fencing, berms, or hedges between the playground and traffic areas

Answer

Physical barriers between the playground and traffic areas are the most effective means of preventing children from running into streets or parking lots.

CPSI - Certified Playground Safety Inspector Practice Test

CPSI - Certified Playground Safety Inspector Practice Test

CPSI Equipment and Site Design Requirements Questions and Answers 2