CPSI Climbers and Upper Body Equipment Standards Questions and Answers 2

Question 1

What is the maximum installation height for upper body equipment (overhead ladders) under ASTM F1487?

Accepted Answer

84 inches

Answer

ASTM F1487 allows upper body equipment such as overhead ladders and monkey bars to be installed at a maximum height of 84 inches.

Question 2

What minimum hand-to-hand spacing is required on overhead ladder rungs for the 5-12 age group?

Accepted Answer

12 inches

Answer

ASTM F1487 requires a minimum rung spacing of 12 inches on overhead ladders for the 5-12 age group to allow proper hand-over-hand movement.

Question 3

What is the correct rung diameter range for overhead climbing bars to ensure safe gripping?

Accepted Answer

0.95 to 1.55 inches

Answer

ASTM F1487 specifies rung diameters of 0.95 to 1.55 inches for overhead climbing equipment to allow a secure grip for children.

Question 4

What use zone is required around upper body equipment such as monkey bars?

Accepted Answer

6 feet on all sides, plus the critical fall height footprint

Answer

Upper body equipment requires a use zone of at least 6 feet on all sides, with the zone extending to encompass the critical fall height from the equipment.

Question 5

What hazard do 'fulcrum' climbing structures present that a CPSI must evaluate?

Accepted Answer

Crush/pinch points where moving parts can trap body parts

Answer

Fulcrum-type climbing structures with moving parts create crush and pinch point hazards where body parts can become trapped between moving and fixed components.

CPSI - Certified Playground Safety Inspector Practice Test

CPSI - Certified Playground Safety Inspector Practice Test

CPSI Climbers and Upper Body Equipment Standards Questions and Answers 2