CMDRT - Certified Medical Device Reprocessing Technician Storage and Distribution Questions and Answers

Question 1

A technician conducting a daily environmental check in the sterile storage area notes that the relative humidity is 75%. According to CSA Z314-18 standards, what is the most appropriate action to take?

Accepted Answer

Report the reading immediately to a supervisor as it exceeds the recommended limit.

Answer

CSA standards recommend that the relative humidity in sterile storage areas be maintained between 30% and 60%. A reading of 75% is too high and creates an environment conducive to microbial growth, potentially compromising the integrity of sterile packages. This deviation must be reported for corrective action.

Question 2

According to Canadian Standards Association (CSA) guidelines for the setup of a sterile storage area, what is the minimum required distance between the bottom storage shelf and the floor?

Accepted Answer

25 cm (10 inches)

Answer

CSA standard Z314-18 specifies that the bottom shelf for sterile storage must be at least 25 cm (10 inches) off the floor. This requirement facilitates proper floor cleaning and protects sterile items from contamination from floor-level dust, debris, and cleaning solutions.

Question 3

An MDRT is preparing to transport several sterile instrument trays from the MDRD to an operating room on another floor. Which of the following is the most appropriate method for transporting these items?

Accepted Answer

Placing the trays in a clean, dedicated, covered cart.

Answer

Sterile items must be transported in a manner that protects them from environmental contamination and physical damage. A clean, dedicated, and covered cart is the standard method to maintain the integrity of the sterile barrier during transit between departments.

Question 4

The principle of using the oldest sterile supplies before newer ones is a key part of inventory management in a sterile storage area. What is this practice called?

Accepted Answer

First-In, First-Out (FIFO)

Answer

First-In, First-Out (FIFO) is a stock rotation principle ensuring that the items that have been in storage the longest are used first. This practice helps prevent items from sitting on shelves for extended periods and minimizes the chances of packaged items expiring, if applicable.

Question 5

Which of the following scenarios best illustrates the concept of 'event-related sterility' being compromised?

Accepted Answer

A wrapped tray is found to have a small water stain on the outer wrap.

Answer

Event-related sterility holds that an item remains sterile until an event compromises the package barrier. A water stain indicates that the package has been wet, and moisture can act as a wick, allowing microorganisms to penetrate the barrier, thus compromising sterility. The other options do not represent events that breach the package's integrity.

CMDRT - Certified Medical Device Reprocessing Technician Practice Test

CMDRT - Certified Medical Device Reprocessing Technician Practice Test

CMDRT - Certified Medical Device Reprocessing Technician Storage and Distribution Questions and Answers