CMDRT - Certified Medical Device Reprocessing Technician High-Level Disinfection Questions and Answers

Question 1

An MDRT is preparing to use a basin of Ortho-phthalaldehyde (OPA) for manual high-level disinfection. The Minimum Effective Concentration (MEC) test strip fails to show a passing result. What is the correct immediate action?

Accepted Answer

Discard the entire basin of solution and prepare a fresh batch, verifying it with a new MEC test.

Answer

A failed Minimum Effective Concentration (MEC) test indicates that the disinfectant solution has fallen below the required potency to achieve high-level disinfection. [5] Using the solution would be ineffective and unsafe. The only correct procedure is to discard the failed solution and replace it with a fresh batch that has been verified with a passing MEC test before use.

Question 2

What is the primary purpose of performing a thorough final rinse with sterile, deionized, or filtered water after a device has completed its required soak time in a high-level disinfectant?

Accepted Answer

To remove residual toxic chemical disinfectant from the device.

Answer

High-level disinfectants are toxic chemicals that can cause serious irritation or chemical burns to patient tissue. [11, 12] A thorough rinse with high-quality water is a critical step to remove all chemical residues, ensuring the device is safe for patient contact. [6]

Question 3

Which of the following are critical parameters that must be monitored and documented for every manual high-level disinfection cycle to ensure its effectiveness?

Accepted Answer

The immersion time and the temperature of the solution.

Answer

For a manual high-level disinfection process to be effective, the device must be fully immersed in the solution for a specific amount of time at a specific temperature, as defined by the manufacturer's instructions for use. [3, 26] These parameters directly impact the disinfectant's ability to kill microorganisms and must be carefully controlled and documented for quality assurance and traceability.

Question 4

A reusable flexible laryngoscope, which contacts the mucous membranes of the throat, is sent to the MDRD. According to the Spaulding Classification system, what is the minimum required level of reprocessing for this device?

Accepted Answer

High-Level Disinfection.

Answer

The Spaulding Classification categorizes medical devices based on infection risk. Because a flexible laryngoscope comes into contact with mucous membranes, it is classified as a semi-critical device. [15, 22] Semi-critical devices require, at a minimum, High-Level Disinfection to eliminate all microorganisms except for large numbers of bacterial spores. Sterilization is preferred if the device can withstand it, but HLD is the minimum acceptable standard. [19]

Question 5

Ortho-phthalaldehyde (OPA) is a common high-level disinfectant. What is a key characteristic of OPA that reprocessing technicians must be aware of to ensure both safety and quality?

Accepted Answer

It will stain any residual protein (e.g., blood, tissue) on instruments a gray/blue color. [1, 2]

Answer

A primary characteristic of OPA is its ability to stain proteins gray or blue. [1, 4] This serves as a visual indicator that pre-cleaning may have been inadequate. It also means that OPA can stain unprotected skin, necessitating the use of appropriate PPE.

CMDRT - Certified Medical Device Reprocessing Technician Practice Test

CMDRT - Certified Medical Device Reprocessing Technician Practice Test

CMDRT - Certified Medical Device Reprocessing Technician High-Level Disinfection Questions and Answers