CMDRT - Certified Medical Device Reprocessing Technician Decontamination Processes Questions and Answers

Question 1

A medical device reprocessing technician is manually cleaning a set of stainless steel surgical instruments. Which of the following cleaning agents is most appropriate for breaking down protein-based soils like blood and tissue?

Accepted Answer

Protease-based enzymatic cleaner

Answer

Protease-based enzymatic cleaners are specifically designed to break down protein-based soils, such as blood and tissue, which are common on surgical instruments. Glutaraldehyde is a high-level disinfectant, alcohol is an antiseptic and disinfectant but not a primary cleaning agent for heavy soil, and saline can damage instruments and does not have cleaning properties.

Question 2

A tray of complex surgical instruments with lumens and box locks arrives in the decontamination area. After manual cleaning, what is the most effective process for removing fine, unseen debris from hard-to-reach areas?

Accepted Answer

Ultrasonic cleaning

Answer

Ultrasonic cleaning uses a process called cavitation, where microscopic bubbles implode on instrument surfaces, to effectively dislodge and remove soil from areas that are difficult to access manually, such as crevices, joints, and lumens. A washer-disinfector is effective but may not reach all intricate parts as well as cavitation. High-level disinfection and rinsing are subsequent steps, not the primary method for removing fine debris.

Question 3

When manually cleaning reusable medical devices, what is the primary reason for using a neutral pH detergent?

Accepted Answer

To prevent corrosion and damage to the instruments

Answer

Using a neutral pH detergent is crucial for preventing damage to surgical instruments. Highly acidic or alkaline solutions can cause corrosion, pitting, and staining, which can compromise the integrity and function of the device. The other options are incorrect; detergents do not activate chemical indicators, cleaning does not equal sterilization, and detergent choice is separate from thermal disinfection parameters.

Question 4

A new technician in the decontamination area is observed placing heavy orthopedic instruments on top of delicate microsurgical instruments in the washer-disinfector basket. Which principle of decontamination is being violated?

Accepted Answer

Proper loading and arrangement of instruments

Answer

Proper loading of automated washers is critical to ensure all surfaces are exposed to the cleaning process and to prevent damage to the instruments. Placing heavy items on top of delicate ones can cause damage and may prevent the water and detergent from reaching all surfaces of the instruments underneath. While following the IFU is always important, this scenario directly illustrates an error in the physical loading process.

Question 5

According to CSA Z314-18, what is the very first step in the decontamination process for a soiled reusable medical device?

Accepted Answer

Thorough cleaning and rinsing

Answer

The first and most critical step in the decontamination process is thorough cleaning and rinsing to remove all visible soil and bioburden. If a device is not properly cleaned, subsequent disinfection or sterilization processes can be rendered ineffective. This principle is a cornerstone of medical device reprocessing standards like CSA Z314-18.

CMDRT - Certified Medical Device Reprocessing Technician Practice Test

CMDRT - Certified Medical Device Reprocessing Technician Practice Test

CMDRT - Certified Medical Device Reprocessing Technician Decontamination Processes Questions and Answers