CESSWI - Certified Erosion, Sediment, and Storm Water Inspector Documentation and Reporting Questions and Answers

Question 1

An inspector observes minor sediment tracking from the construction exit onto a public road. While the inspector is on-site, the contractor immediately dispatches a sweeper to clean the road. How should the inspector document this in the inspection report?

Accepted Answer

Note the deficiency and the immediate corrective action taken in the same report.

Answer

Inspection reports must be a complete and accurate record of site conditions at the time of the inspection. This includes documenting both deficiencies and any corrective actions taken, even if they occur immediately. This creates a full picture of site activities and demonstrates responsive compliance.

Question 2

What is the primary purpose of including dated photographs in a construction stormwater inspection report?

Accepted Answer

To provide a clear, time-stamped visual record of site conditions and BMP performance.

Answer

Dated photographs serve as crucial, objective evidence of the conditions observed during an inspection. They can verify the status of BMPs, document deficiencies, show the context of the site, and confirm that corrective actions have been completed, supporting the written findings in the report.

Question 3

A CESSWI is reviewing site records to prepare for a regulatory audit. Which of the following documents is MOST critical for demonstrating ongoing compliance with the inspection and maintenance requirements of the NPDES Construction General Permit?

Accepted Answer

A complete file of all signed and certified inspection reports and the corrective action log.

Answer

The series of dated inspection reports and a log of any corrective actions provide a continuous record of the site's condition, the operator's diligence in identifying and fixing problems, and overall adherence to the SWPPP and permit requirements.

Question 4

During a site inspection, a 15-gallon drum of hydraulic fluid is tipped over, and the entire contents spill onto a gravel staging area. The spill is quickly contained with absorbent materials. According to typical SWPPP requirements, what is the inspector's most important documentation responsibility?

Accepted Answer

Ensure the incident is recorded in the SWPPP's spill log with details on the substance, volume, location, and cleanup measures.

Answer

The SWPPP requires tracking and reporting of spills. Documenting the specifics of the spill—what it was, how much, where it happened, and the response taken—in a dedicated spill log is a critical record-keeping requirement for compliance and future prevention efforts.

Question 5

Which of the following scenarios BEST illustrates a situation that requires documentation in a Corrective Action Log, as opposed to being handled as routine maintenance?

Accepted Answer

A storm event causes a large washout, undermining a significant portion of a perimeter silt fence, requiring a complete redesign and replacement.

Answer

A large-scale failure of a BMP that requires significant repair or a redesign is a trigger for a formal corrective action. Routine maintenance covers minor repairs like replacing a single sandbag, removing small amounts of sediment, or picking up trash. A major failure indicates a potential flaw in the system that must be formally documented and addressed through the corrective action process outlined in the CGP.

(CESSWI) Certified Erosion, Sediment, and Storm Water Inspector Practice Test

(CESSWI) Certified Erosion, Sediment, and Storm Water Inspector Practice Test

CESSWI - Certified Erosion, Sediment, and Storm Water Inspector Documentation and Reporting Questions and Answers