CDCP - Certified Data Centre Professional Data Center Power Infrastructure Questions and Answers

Question 1

A data center manager is calculating the facility's Power Usage Effectiveness (PUE). The total energy consumed by the data center is 500,000 kWh, and the energy consumed by the IT equipment is 350,000 kWh. What is the PUE, and what does this value indicate?

Accepted Answer

1.43, indicating that for every 1 kWh used by IT equipment, 0.43 kWh is used by supporting infrastructure.

Answer

Power Usage Effectiveness (PUE) is calculated by dividing the total facility energy by the IT equipment energy. In this scenario, 500,000 kWh / 350,000 kWh = 1.43. A PUE of 1.0 is the ideal, meaning all power goes to IT equipment. A value of 1.43 signifies that for every 1 kWh consumed by the IT load, an additional 0.43 kWh is consumed by overhead systems like cooling and lighting.

Question 2

Which type of UPS system provides the highest level of protection for critical data center loads by continuously regenerating a clean sine wave and having zero transfer time to battery?

Accepted Answer

Online Double-Conversion UPS

Answer

An Online Double-Conversion UPS continuously converts incoming AC power to DC and then inverts it back to AC. This process completely isolates the load from the utility power, providing the highest level of protection against all power disturbances and ensuring a zero-millisecond transfer time to battery power during an outage.

Question 3

A financial services company requires its critical trading servers to have redundant power from two independent UPS systems. To ensure instantaneous and seamless switching between these two power sources in the event of a failure, which device should be installed?

Accepted Answer

Static Transfer Switch (STS)

Answer

A Static Transfer Switch (STS) uses solid-state electronics (thyristors) to perform a near-instantaneous transfer between two AC power sources, typically in under 4-8 milliseconds. This speed is essential for sensitive electronic loads like servers, which cannot tolerate the longer transfer time of a mechanical Automatic Transfer Switch (ATS).

Question 4

According to the TIA-942 standard, achieving a high level of fault tolerance and concurrent maintainability in a data center's power infrastructure typically involves which of the following design principles?

Accepted Answer

Implementing multiple, independent, and physically isolated power distribution paths.

Answer

The TIA-942 standard defines different rating levels (Tiers) based on redundancy and fault tolerance. Higher-rated data centers require concurrently maintainable and fault-tolerant infrastructure, which is achieved by implementing multiple independent power paths (e.g., 2N or 2N+1 redundancy) from the utility source through to the IT equipment. This ensures that a single failure or maintenance activity on one path does not impact the critical load.

Question 5

In a typical data center power distribution chain, what is the primary function of a Power Distribution Unit (PDU) located within an equipment rack?

Accepted Answer

To take the power from an upstream source and distribute it to multiple devices in the rack.

Answer

A rack PDU is essentially a power strip designed for data center racks. Its main role is to distribute the power supplied by a larger UPS or floor PDU to the individual servers, switches, and other IT devices mounted within the same rack.

CDCP - Certified Data Centre Professional Practice Test

CDCP - Certified Data Centre Professional Practice Test

CDCP - Certified Data Centre Professional Data Center Power Infrastructure Questions and Answers