CBET - Certified Biomedical Equipment Technician Healthcare IT and Networking Questions and Answers

Question 1

A BMET is troubleshooting a networked medical device that is failing to transmit patient data to the Electronic Health Record (EHR). The device has a valid IP address and can ping other devices on the same subnet. Which of the following is the MOST likely cause of the issue?

Accepted Answer

Incorrect VLAN assignment

Answer

A Virtual LAN (VLAN) is used to segment a network. If the medical device is on a different VLAN than the EHR server, it will not be able to communicate, even with correct IP settings for its own subnet. Since the device can ping other local devices, the cable and basic IP configuration are likely correct.

Question 2

Which healthcare data standard is primarily used for the exchange, storage, and retrieval of medical images and related information?

Accepted Answer

DICOM

Answer

DICOM (Digital Imaging and Communications in Medicine) is the international standard for medical images and related information. It defines formats for medical images that can be exchanged between different devices and systems from various manufacturers. HL7 is a broader standard for exchanging clinical and administrative data, HIPAA is a set of regulations for protecting patient information, and ICD-10 is a coding system for diagnoses and procedures.

Question 3

A hospital is implementing a new fleet of infusion pumps that will integrate directly with the EHR. To ensure the confidentiality and integrity of the patient data being transmitted wirelessly, which of the following security measures is MOST critical?

Accepted Answer

Implementing WPA2/WPA3 encryption

Answer

WPA2 (Wi-Fi Protected Access 2) and its successor, WPA3, are security protocols that encrypt wireless network traffic. This is essential to protect electronic Protected Health Information (ePHI) from being intercepted, as required by the HIPAA Security Rule. Physical locks prevent theft but not data interception. Alarms and IP addressing methods are not primary data security measures.

Question 4

A user reports that a newly installed patient monitor in a specific room cannot connect to the central monitoring station. The monitor works correctly when connected in an adjacent room. What is the FIRST step a BMET should take to troubleshoot this network-related problem?

Accepted Answer

Check the network wall port and patch cable in the problematic room.

Answer

Since the monitor works in another location, the device itself is likely functional. The problem is most likely related to the network infrastructure specific to that room. The first logical step is to check the physical connection points—the wall port and the cable connecting the device to it—as these are common points of failure.

Question 5

What is the primary function of the Health Level Seven (HL7) standard in a healthcare environment?

Accepted Answer

To provide a framework for exchanging, integrating, and retrieving electronic health information.

Answer

HL7 provides a standard framework and language for the exchange of clinical and administrative data between different healthcare software applications. This allows disparate systems (e.g., EHR, laboratory information systems, billing systems) to communicate effectively. It does not define physical cables, mandate specific software, or standardize medical images (which is the role of DICOM).

CBET - Certified Biomedical Equipment Technician Practice Test

CBET - Certified Biomedical Equipment Technician Practice Test

CBET - Certified Biomedical Equipment Technician Healthcare IT and Networking Questions and Answers