CAOHC - Council for Accreditation in Occupational Hearing Conservation Physics of Sound & Anatomy Questions and Answers

Question 1

An occupational hearing conservationist is measuring noise levels in a manufacturing plant. To best assess the potential risk for noise-induced hearing loss for employees, which sound level meter weighting scale should be used?

Accepted Answer

A-Weighting

Answer

A-weighting (dBA) is the standard for occupational noise measurements because it mimics the frequency response of the human ear and has been shown to correlate well with the risk of noise-induced hearing loss. C-weighting is less sensitive to low frequencies and is often used for measuring peak sound pressure levels or entertainment noise. Z-weighting has a flat response and does not account for the ear's varying sensitivity to different frequencies.

Question 2

A worker is operating a stamping press that generates an average noise level of 95 dBA. According to the inverse square law, if the worker doubles their distance from the press in an open, unobstructed area, what would the new approximate noise level be?

Accepted Answer

89 dBA

Answer

The inverse square law states that for every doubling of distance from a point source of sound in a free field, the sound pressure level decreases by approximately 6 dB. Therefore, doubling the distance from a 95 dBA source would result in a noise level of approximately 89 dBA (95 dB - 6 dB).

Question 3

Which part of the ear is responsible for converting mechanical sound vibrations into electrical signals that are sent to the brain?

Accepted Answer

Organ of Corti

Answer

The Organ of Corti, located in the cochlea of the inner ear, contains hair cells that are the sensory receptors for hearing. These cells transduce the mechanical energy of sound vibrations into electrical nerve impulses. The tympanic membrane vibrates in response to sound waves, the ossicles amplify these vibrations, and the Eustachian tube equalizes pressure.

Question 4

An employee works an 8-hour shift in an area with a constant noise level of 85 dBA. After work, they report a temporary ringing in their ears and a feeling of muffled hearing. This condition is best described as:

Accepted Answer

Temporary Threshold Shift (TTS)

Answer

Temporary Threshold Shift (TTS) is a short-term decrease in hearing sensitivity that can occur after exposure to loud noise. It is often accompanied by tinnitus (ringing in the ears). Hearing typically returns to normal after a period of rest away from the noise. Permanent Threshold Shift (PTS) is a non-recoverable hearing loss. Acoustic trauma results from a single, intense noise event. Conductive hearing loss involves a problem with the outer or middle ear.

Question 5

Which of the following is the primary function of the middle ear ossicles (malleus, incus, and stapes)?

Accepted Answer

To amplify sound vibrations from the eardrum and transmit them to the inner ear.

Answer

The three tiny bones of the middle ear, known as the ossicles, act as a lever system to amplify the force of vibrations from the larger tympanic membrane (eardrum) and transfer them to the much smaller oval window of the inner ear. This amplification is crucial for overcoming the impedance mismatch between the air-filled middle ear and the fluid-filled inner ear.

CAOHC - Council for Accreditation in Occupational Hearing Conservation Practice Test

CAOHC - Council for Accreditation in Occupational Hearing Conservation Practice Test

CAOHC - Council for Accreditation in Occupational Hearing Conservation Physics of Sound & Anatomy Questions and Answers