Other Skilled Trades Carpentry 1

Question 1

What is the standard stud spacing used in most US residential wall framing?

Accepted Answer

16 inches on center

Answer

16 inches on center is the standard stud spacing used in most US residential construction for wall framing.

Question 2

Which type of wood joint is commonly used to connect two pieces of wood at a 90-degree corner in cabinet making?

Accepted Answer

Dovetail joint

Answer

Dovetail joints are prized in cabinet making for their interlocking wedge-shaped pins that provide exceptional strength at 90-degree corners.

Question 3

What does the term 'plumb' mean in carpentry?

Accepted Answer

Perfectly vertical

Answer

Plumb means perfectly vertical, as verified with a plumb bob or level.

Question 4

Which saw is best suited for making precise cross-cuts and miter cuts in trim carpentry?

Accepted Answer

Miter saw

Answer

A miter saw (also called a chop saw) is specifically designed for accurate cross-cuts and angled miter cuts used in trim and finish carpentry.

Question 5

In the US, what is the standard rough opening width for a 2/0 (24-inch) pre-hung interior door?

Accepted Answer

26 inches

Answer

A 2/0 door requires a rough opening of approximately 26 inches to allow for the door frame, shimming, and clearance.

Other Skilled Trades Practice Test