OIT Basic Operation and Controls 2

Question 1

Before starting a forklift, an operator must check that the parking brake is engaged and the gear selector is in which position?

Accepted Answer

Neutral

Answer

The gear selector must be in neutral before starting a forklift to prevent unexpected movement.

Question 2

What is the correct procedure when the low fuel warning light illuminates on a propane-powered lift truck?

Accepted Answer

Safely park the truck and replace the propane cylinder

Answer

When the low fuel warning activates, the operator should park safely and swap the propane cylinder according to facility procedures.

Question 3

Which instrument on a lift truck indicates the charge level of a battery-powered electric forklift?

Accepted Answer

State of charge indicator

Answer

The state of charge (SOC) indicator shows remaining battery capacity so operators know when recharging is needed.

Question 4

An operator approaches a floor drain and the forklift begins to tip to one side. The FIRST action should be to:

Accepted Answer

Steer away and slow down immediately

Answer

Steering away from the hazard and reducing speed prevents tipping when uneven surfaces are encountered.

Question 5

What is the function of the tilt control lever on a standard counterbalanced forklift?

Accepted Answer

Angles the mast forward or backward

Answer

The tilt lever controls the mast angle, allowing the operator to tilt forks back for load stability during travel.

(OIT) Operator in Training Practice Test