NSC Safety Regulations & OSHA Compliance 2

Question 1

Under OSHA 29 CFR 1910.178, how often must powered industrial trucks undergo a formal inspection?

Accepted Answer

Before each shift or daily use

Answer

OSHA requires forklifts to be inspected before each shift or at least daily if used on a round-the-clock basis.

Question 2

Which OSHA standard specifically governs powered industrial trucks in general industry workplaces?

Accepted Answer

29 CFR 1910.178

Answer

29 CFR 1910.178 is the OSHA standard that covers powered industrial trucks in general industry settings.

Question 3

When a forklift is found to be unsafe during an inspection, what must happen before it is used again?

Accepted Answer

It must be taken out of service and repaired

Answer

OSHA requires that an unsafe forklift be removed from service immediately and repaired before returning to operation.

Question 4

An employer is cited for operating a forklift in an area with flammable vapors using a non-approved truck type. Which OSHA requirement was violated?

Accepted Answer

Designated area classification and truck type matching

Answer

OSHA requires that the forklift type (e.g., EX, DY) must match the hazardous area classification where it is operated.

Question 5

Under OSHA regulations, who is responsible for ensuring forklift operators are trained and evaluated?

Accepted Answer

The employer

Answer

OSHA places the responsibility for operator training and evaluation squarely on the employer.

NSC Practice Test