NSC Quality Control & Inspection 3

Question 1

A forklift operator notices the horn does not work during the pre-operation inspection. What is the appropriate response?

Accepted Answer

Remove the forklift from service until the horn is repaired

Answer

A non-functioning horn is a safety defect; the forklift must be taken out of service until repaired, as the horn is a required safety device per OSHA standards.

Question 2

During inspection, the operator finds the forklift's load backrest extension is missing. What should occur?

Accepted Answer

Tag out the forklift and notify the supervisor

Answer

The load backrest extension prevents loads from falling onto the operator; its absence requires the unit be removed from service and reported.

Question 3

What is the primary purpose of inspecting the forklift's data plate during a pre-operation check?

Accepted Answer

To check load capacity and attachment configurations

Answer

The data plate provides critical load capacity information including rated capacity with and without attachments, which the operator must know before handling any load.

Question 4

Which condition of the forklift's carriage requires immediate removal from service?

Accepted Answer

Carriage bar is bent or cracked

Answer

A bent or cracked carriage bar is a structural defect that compromises load handling safety and requires immediate removal from service.

Question 5

An operator discovers hydraulic fluid pooling beneath the forklift before a shift. The correct action is to:

Accepted Answer

Remove the forklift from service and report the leak to maintenance

Answer

Hydraulic fluid leaks indicate a compromised system that can lead to sudden loss of load control; the forklift must be removed from service immediately.

NSC Practice Test

NSC Practice Test

NSC Quality Control & Inspection 3