NSC Maintenance & Inspection Procedures 3

Question 1

What is the primary purpose of the forklift's pre-shift inspection checklist?

Accepted Answer

To identify defects before operation so hazards can be corrected

Answer

The pre-shift checklist helps identify defects and unsafe conditions before operation, preventing accidents and injuries.

Question 2

An operator discovers engine oil is significantly below the minimum level on the dipstick. What is the correct response?

Accepted Answer

Do not operate the forklift; notify maintenance immediately

Answer

Operating with insufficient oil can cause severe engine damage and the forklift must be taken out of service until the issue is resolved.

Question 3

When checking forklift battery fluid levels, which safety precautions are necessary?

Accepted Answer

Wear gloves and eye protection, keep flames away from the battery area

Answer

Battery acid is corrosive and batteries emit hydrogen gas, so PPE and no-flame rules are essential when checking fluid levels.

Question 4

What should an operator do if the forklift's horn does not work during the pre-shift inspection?

Accepted Answer

Remove the forklift from service until the horn is repaired

Answer

A working horn is required for safe operation to warn pedestrians; the forklift must be removed from service until repaired.

Question 5

Which maintenance task is specifically prohibited for forklift operators without proper authorization?

Accepted Answer

Performing welding or structural repairs

Answer

Welding and structural repairs require trained, authorized personnel and must never be performed by operators without proper certification.

NSC Practice Test