โ† All NSC Flashcard Decks

Safety Regulations & OSHA Compliance Flashcards

7 cards from real NSC practice questions. Tap to flip, then mark Knew It or Still Learning โ€” missed cards come back until you master them.

Read the first 7 Safety Regulations & OSHA Compliance flashcards as text
  1. Under OSHA, which condition requires that a propane-powered forklift be used only in outdoor or well-ventilated areas?

    Answer: Carbon monoxide emissions from combustion engines

    Propane-powered forklifts emit carbon monoxide, which can accumulate to dangerous levels indoors without adequate ventilation.

  2. OSHA's lockout/tagout standard (29 CFR 1910.147) applies to forklift maintenance. What does this require?

    Answer: Deenergizing and isolating the forklift before servicing

    Lockout/tagout requires that energy sources be isolated and locked out before any servicing or maintenance to prevent unexpected energization.

  3. Which OSHA standard addresses hazard communication, including the requirement to have Safety Data Sheets (SDS) for chemicals used in forklift maintenance?

    Answer: 29 CFR 1910.1200

    29 CFR 1910.1200 (Hazard Communication Standard) requires SDS for hazardous chemicals, including lubricants and fluids used on forklifts.

  4. An OSHA inspector arrives at a facility unannounced. The employer has the right to:

    Answer: Accompany the inspector during the walkaround

    Employers have the right to accompany the OSHA compliance officer during the walkaround inspection.

  5. Under OSHA regulations, what is the minimum aisle width required for one-way forklift traffic?

    Answer: The load width plus 3 feet

    OSHA requires aisles used for one-way forklift travel to be at least 3 feet wider than the widest load.

  6. Which type of OSHA violation is cited when the employer knew about a hazardous condition and made no effort to correct it?

    Answer: Willful violation

    A willful violation is cited when evidence shows the employer knowingly disregarded OSHA requirements or was plainly indifferent to worker safety.

  7. OSHA requires pedestrian and forklift traffic separation in the workplace. Which method is considered the most effective?

    Answer: Physical barriers such as guardrails or separate aisles

    Physical separation using barriers or designated lanes is OSHA's preferred method for preventing pedestrian-forklift incidents.

Safety Regulations & OSHA Compliance Flashcards โ€” NSC Study Cards with Answers