Risk Management & Site Safety Flashcards
7 cards from real NSC practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Risk Management & Site Safety flashcards as text
When a forklift is traveling on a ramp or incline with a load, the load should be positioned:
Answer: Facing uphill to prevent tipping backward
On inclines, the load must always face uphill so gravity keeps it pressed against the forks, preventing the load from sliding off.
Which condition would MOST increase the risk of a forklift tip-over on level ground?
Answer: Turning at speed while carrying a raised load
Turning at speed with a raised load shifts the center of gravity outside the stability triangle, dramatically increasing tip-over risk.
A risk assessment before forklift operation should include evaluating:
Answer: Floor conditions, pedestrian traffic, overhead clearances, and load characteristics
A thorough pre-operation risk assessment covers floor surface, people in the area, height restrictions, and load specifics to identify all hazards.
What is the safest approach when a forklift operator encounters an unmarked hazard on the warehouse floor?
Answer: Stop, assess the hazard, and report it before proceeding
Stopping to assess and report an unmarked hazard ensures it is documented and corrected before it causes injury to other workers.
Forklift operators should sound the horn and proceed slowly when approaching:
Answer: Blind corners, intersections, and doorways
Blind corners, intersections, and doorways are high-collision zones where pedestrians may be unseen, requiring a horn warning and reduced speed.
Which workplace condition is classified as an environmental risk factor for forklift operations?
Answer: Inadequate aisle lighting
Inadequate lighting is an environmental risk factor that reduces visibility and increases collision hazards for forklift operators.
When must a forklift operator perform a safety inspection of a new work site before beginning operations?
Answer: Every time they operate in an unfamiliar or changed work area
NSC guidelines require operators to inspect any unfamiliar or recently changed work area before beginning forklift operations to identify new hazards.