Tools, Materials, and Equipment Flashcards

What is the correct procedure for storing sharp hand tools?

Answer: Store with blade guards, in designated holders, or with cutting edges protected

Sharp tools should be stored with blade guards or covers, in designated holders, with cutting edges protected to prevent dulling, damage, and accidental injury.

What is the function of a multimeter in electrical work?

Answer: To measure voltage, current, and resistance in electrical circuits

A multimeter measures multiple electrical properties including voltage (AC and DC), current, and resistance.

What does the term 'feed rate' mean when operating a drill press?

Answer: The speed at which the drill bit is advanced into the workpiece

Feed rate refers to the speed at which the drill bit is advanced into the workpiece, which must be controlled for optimal results.

What is the purpose of lockout/tagout (LOTO) procedures?

Answer: To ensure equipment is properly shut off and cannot be restarted during maintenance

LOTO procedures ensure that hazardous energy sources are isolated and equipment cannot be accidentally started during maintenance.

What is the advantage of using carbide-tipped cutting tools over high-speed steel (HSS)?

Answer: Carbide maintains its cutting edge longer and performs better at higher temperatures

Carbide-tipped tools maintain their cutting edge much longer than HSS and can operate at significantly higher cutting speeds and temperatures.

What safety precaution should be taken before changing a blade on any power saw?

Answer: Disconnect the power source completely (unplug or remove battery)

Before changing any blade, always disconnect the power source completely to eliminate any possibility of accidental startup.