NICET Information 4 — Questions and Answers
Question 1: In NICET's Fire Alarm Systems program, the 'Information' subject area most closely pertains to which type of knowledge?
- Electrical circuit theory only
- General reference, code sources, and understanding system documentation (Correct answer)
- Installation tool selection
- Marketing and sales of fire alarm products
Correct answer: General reference, code sources, and understanding system documentation
The Information subject area covers how to locate and use reference materials, codes, and technical documentation relevant to the discipline.
Question 2: When a NICET candidate references NFPA 72 on a Fire Alarm exam, they are primarily using it as:
- A manufacturer's installation manual
- A model building code
- A nationally recognized technical standard for fire alarm systems (Correct answer)
- A state licensing statute
Correct answer: A nationally recognized technical standard for fire alarm systems
NFPA 72 is the National Fire Alarm and Signaling Code, a consensus standard that governs fire alarm system design and installation.
Question 3: Which document type would a technician consult to understand the specific installation requirements approved by the local Authority Having Jurisdiction (AHJ)?
- The manufacturer's cut sheet
- NFPA 70E
- Local amendments and adopted codes (Correct answer)
- ANSI Z535 safety color standards
Correct answer: Local amendments and adopted codes
The AHJ enforces locally adopted codes and amendments, which may modify or supplement national standards.
Question 4: What does the abbreviation 'AHJ' stand for in the context of NICET and fire protection?
- Authorized Hardware Junction
- Authority Having Jurisdiction (Correct answer)
- Approved Hazard Journal
- Annual Hazard Judge
Correct answer: Authority Having Jurisdiction
AHJ stands for Authority Having Jurisdiction, the organization or official responsible for enforcing applicable codes.
Question 5: In which section of a set of fire alarm system plans would a technician most likely find the list of installed devices and their part numbers?
- The site plan
- The riser diagram
- The equipment schedule or legend (Correct answer)
- The electrical load calculations
Correct answer: The equipment schedule or legend
Equipment schedules or device legends list all installed components, their model numbers, and quantities on a set of plans.
Question 6: Which of the following best describes a 'submittal' in the context of a fire alarm installation project?
- The final as-built drawing set
- Documentation submitted to the AHJ or engineer for approval before installation begins (Correct answer)
- A warranty card sent to the manufacturer
- A training record submitted to NICET
Correct answer: Documentation submitted to the AHJ or engineer for approval before installation begins
A submittal is pre-installation documentation, such as shop drawings and product data sheets, submitted for review and approval.
Question 7: What information does an 'as-built' drawing provide that the original design drawings do not?
- Estimated material costs
- The system as it was actually installed, reflecting any field changes (Correct answer)
- The engineer's design intent only
- OSHA compliance certifications
Correct answer: The system as it was actually installed, reflecting any field changes
As-built drawings are updated after installation to show the exact locations and configurations of all installed components.
NICET Information 4
In NICET's Fire Alarm Systems program, the 'Information' subject area most closely pertains to which type of knowledge?